Hakko Electronics Monitouch V9 Series Connection Manual page 197

8-4 8. CIMON
Available Device Memory
The available setting range of device memory varies depending on the PLC model. Be sure to set within the range available for
the PLC to be used. Use [TYPE] when assigning indirect device memory for macro programs.
D (Data Memory)
X (External Input)
Y (External Output)
M (Internal Relay)
L (Internal Relay)
K (Latch Relay)
F (Flags)
T (Timer Output)
TS (Timer SV)
TC (Timer PV)
C (Counter Output)
CS (Counter SV)
CC (Counter PV)
S (Step Control Relay)
*1 The addresses are expressed in "bytes". For word designation, specify an even-numbered address.
Device Memory TYPE
00H
01H
02H
03H
04H
05H
06H Read only
07H
08H
09H
0AH
0BH
0CH
0DH *1
Remarks