Control Logix / Compact Logix - Hakko Electronics Monitouch V9 Series Connection Manual

2.1.3

Control Logix / Compact Logix

The logical port PLC1 can only be selected because the tag table is used.
Communication Setting
Editor
Communication setting
Connection Mode
Signal Level
Baud Rate
Data Length
Stop Bit
Parity
Target Port No.
PLC
Control Logix
Serial port
Mode
Baud Rate
Data Bits
Parity
Stop Bits
Control Line
Item
1 : 1 / Multi-link2 / Multi-link2 (Ethernet)
4800 / 9600 / 19200 / 38400 / 57600 115k bps
Item
Setting
RS-232C / RS-422/485
8 bits
1 / 2 bits
None / Odd / Even
0 to 31
Setting
System
38400
8
None
1
No Handshake
2.1 PLC Connection
(Underlined setting: default)
Remarks
For multi-link2 and multi-link2 (Ethernet), be
sure to use the same tag table.
Remarks
2-11