Hakko Electronics Monitouch V9 Series Connection Manual page 387

19.1.4 HIDIC-S10V
Communication Setting
Editor
Communication setting
Item
Connection Mode
Signal Level
Baud Rate
Data Length
Stop Bit
Parity
PLC
All PLC parameters are fixed to the following settings:
Baud rate: 19200 bps, data length: 8 bits, stop bit: 1 bit, parity: odd
However, when the optional RS-232C/RS-422 module is used, the channel and the protocol must be set using the channel
No./protocol setting switch.
Channel No./Protocol Setting Switch
A maximum of two RS-232C/RS-422 modules (four channels) can be attached to one CPU. When using multiple channels, set
a unique channel number (#1 to #4) for each.
LQE560 / LQE565
MODU NO
8
9
A
E
Setting
1 : 1 / Multi-link2 / Multi-link2 (Ethernet)
RS-232C / RS-422/485
4800 / 9600 / 19200 / 38400 / 57600 / 115K bps
8 bits
1 bit
Odd
Communication Mode
H-7338 protocol
19.1 PLC Connection
(Underlined setting: default)
Remarks
Channel No.
#0
#1
#2
#3
19-7