Hakko Electronics Monitouch V9 Series Connection Manual page 360

17-2 17. Gammaflux
17.1.1 TTC2100
Communication Setting
Editor
Communication setting
Item
Connection Mode
Signal Level
Baud Rate
Data Length
Stop Bit
Parity
Target Port No.
Temperature Controller
Be sure to match the settings to those made under [Communication Setting] of the editor.
Available Device Memory
The available setting range of device memory varies depending on the model. Be sure to set within the range available for the
model to be used. Use [TYPE] when assigning indirect device memory for macro programs.
TD (temperature data)
ZC (zone commands)
ZD (zone commands2)
Specify the storage device memory.
Address denotations are as follows.
 For the TD:
Example: 0 : #0 : TD0000A
 For ZC, ZD:
Example: 0 : #1 : ZC000A0
1 : 1 / 1 : n / Multi-link2 / Multi-link2 (Ethernet) /
1 : n Multi-link2 (Ethernet)
RS-232C / RS-422/485
Device Memory
Command No. (HEX)
ZONE No. 00 - 3FH (1 - 64)
Storage device memory
0: Volatile
1: Nonvolatile
Station number
Data No. (HEX)
Command No. (HEX)
ZONE No. 00 - 3FH (1 - 64)
Storage device memory
0: Volatile
1: Nonvolatile
Station number
Setting
57600 bps
8 bits
1 bit
Not provided
0 to 31
TYPE
00H Read only
01H Partially read only
02H Partially read only
(Underlined setting: default)
Remarks
Remarks