Hakko Electronics Monitouch V9 Series Connection Manual page 155

4-24 4. Azbil
4.2.12 DCP31/32
Communication Setting
Editor
Communication setting
Connection Mode
Signal Level
Baud Rate
Data Length
Stop Bit
Parity
Target Port No.
Controller
Setting group: Make the following setting on the setup data.
Item
Communication
address
Baud rate
Data type
Available Device Memory
The available setting range of device memory varies depending on the model. Be sure to set within the range available for the
model to be used. Use [TYPE] when assigning indirect device memory for macro programs.
Device Memory
Item
1 : 1 / 1 : n / Multi-link2 / Multi-link2 (Ethernet) /
Indication
C84 1 to 31
0: 9600 bps, even parity, 1 stop bit
1: 9600 bps, without parity, 2 stop bit
C85
2: 4800 bps, even parity, 1 stop bit
3: 4800 bps, without parity, 2 stop bit
C93 0: Additional terminal
TYPE
--- 00H
Setting
1 : n Multi-link2 (Ethernet)
RS-422/485
4800 / 9600 bps
8 bits
1 / 2 bits
None / Odd / Even
1 to 31
Setting
(Underlined setting: default)
Remarks
(Underlined setting: default)
Remarks
Communication is disabled when "0" is set.
Remarks