Hakko Electronics Monitouch V9 Series Connection Manual page 86

Available Device Memory
The available setting range of device memory varies depending on the PLC model. Be sure to set within the range available for
the PLC to be used. Use [TYPE] when assigning indirect device memory for macro programs.
N (integer)
B (bit)
T.ACC (timer/current value)
T.PRE (timer/set value)
C.ACC (counter/current value)
C.PRE (counter/set value)
I (input)
O (output)
S (status)
T (timer/control)
C (counter/control)
R (control)
R.LEN (control/data length)
R.POS (control/data position)
D (BCD)
A (ASCII)
F (FLOAT)
ST (STRING)
Make settings for "Data Files" using the ladder tool. Otherwise, "Error Code F007", etc. is displayed on MONITOUCH. For
more information, refer to the PLC manual issued by the manufacturer.
Address denotations
The assigned device memory is expressed as shown below when editing the screen.
Example: For word access
Nxxx: yyy
The file number will not be displayed for the input, output or status device memory.
Device Memory
Element number
File number
Device type
2.1 PLC Connection
TYPE
00H
01H
02H
03H
04H
05H
06H
07H
08H
09H
0AH
0BH
0CH
0DH
0EH
0FH
10H Real number
11H
For bit access
Nxxx: yyy/zz
Bit number
Element number
File number
Device type
2-9
Remarks