8-2
8. CIMON
8.1.1
BP Series
Communication Setting
Editor
Communication setting
Item
Connection Mode
Signal Level
Baud Rate
Data Length
Stop Bit
Parity
PLC
CM2-BPxxMDxx-R, T, S, U (LOADER Port)
No particular setting is necessary on the PLC.
The communication parameters are fixed; signal level: RS-232C, baud rate: 38400 bps, data length: 8 bits, stop bit: 1 bit, parity:
none.
CM2-BPxxMDxx-T, U (CH1)
Make communication settings using the application software "CICON". For more information, refer to the instruction manual
issued by CIMON.
Item
Protocol
Baud Rate
Parity
Data Bit
Stop Bit
Setting
1 : 1 / Multi-link2 / Multi-link2 (Ethernet)
RS-232C / RS-422/485
9600 / 19200 / 38400 bps
7 / 8 bits
1 / 2 bits
None / Odd / Even
Setting
CICON(Loader) Protocol
9600 / 19200 / 38400 bps
Even / Odd / None
7 / 8 bits
1 / 2 bits
(Underlined setting: default)
Remarks
Remarks