Ph Series - Hakko Electronics Monitouch V9 Series Connection Manual

16.2.25 PH Series

Communication Setting
Editor
Communication setting
Item
Connection Mode
Signal Level
Baud Rate
Data Length
Stop Bit
Parity
Target Port No.
Recorder
The communication parameters can be set using keys attached to the front of the recorder.
Be sure to match the settings to those made under [Communication Setting] of the editor.
Parameter
Station No.
Baud rate
Stop bit
Parity
* The communication function of the recorder can be selected at the time of purchase. Select a model on which RS-485 transmission mode is
available.
* The communication parameter (data length) is fixed to 8 bits.
16.2 Temperature Controller/Servo/Inverter Connection
Setting
1 : 1 / 1 : n / Multi-link2 /
Multi-link2 (Ethernet) /
1 : n Multi-link2 (Ethernet)
RS-422/485
4800 / 9600 / 19200 bps
8 bits
1 / 2 bits
None / Odd / Even
1 to 31
Setting
1 to 31
4800 / 9600 / 19200 bps 19200 bps
1 / 2 bits
None / Even / Odd
Do not change the default setting because the setting on the
recorder cannot be changed.
Example
1
1
Odd
16-73
(Underlined setting: default)
Remarks
(Underlined setting: default)
Remarks