Hakko Electronics Monitouch V9 Series Connection Manual page 415

20-20 20. Hitachi Industrial Equipment Systems
Available Device Memory
The available setting range of device memory varies depending on the model. Be sure to set within the range available for the
model to be used. Use [TYPE] when assigning indirect device memory for macro programs.
d
F
A
b
C
H
P
T (trip history)
Indirect Device Memory Designation
15
n + 0 Models (11 to 18)
n + 1
n + 2
Expansion code
n + 3
* In the expansion code, set which word, higher or lower, is to be read when a double-word address is specified.
15
0 0
PLC_CTL
Macro command "PLC_CTL F0 F1 F2"
Contents
Normal turn, reverse
turn or stop
command
Frequency command
setting
Device Memory
8 7
Device type
Address No.
* Bit designation
00 Station number
0 0 0 0 0
F0
n
n + 1
1 - 8
(PLC1 - 8)
n + 2
n
1 - 8
n + 1
(PLC1 - 8)
n + 2
TYPE
00H Double-word, read only
01H Double-word
02H Double-word
03H Double-word
04H Double-word
05H Double-word
06H Double-word
07H Double-word, read only
0
8
0: 0 to 15 bits (lower)
1: 16 to 31 bits (higher)
F1 (= $u n)
Station number
Command: 0
0: Stop command
1: Normal turn command
2: Reverse turn command
Station number
Command: 1
Frequency (0 to 400 Hz)
Remarks
F2
3
3