Hakko Electronics Monitouch V9 Series Connection Manual page 224

11-2 11. EATON Cutler-Hammer
11.1.1 ELC
Communication Setting
Editor
Communication setting
Item
Connection Mode
Signal Level
Baud Rate
Data Length
Stop Bit
Parity
Target Port No.
PLC
Make the PLC setting using device memory "D" (data register). For more information, refer to the PLC manual issued by the
manufacturer.
Available Device Memory
The available setting range of device memory varies depending on the PLC model. Be sure to set within the range available for
the PLC to be used. Use [TYPE] when assigning indirect device memory for macro programs.
D (data register)
X (input)
Y (output)
M (auxiliary relay)
S (step point)
T (timer)
C (counter)
32C (high-speed counter)
Setting
1 : 1 / 1 : n / Multi-link2 / Multi-link2 (Ethernet) /
1 : n Multi-link2 (Ethernet)
RS-232C / RS-422/485
4800 / 9600 / 19200 / 38400 / 57600 / 115200 bps
7 / 8 bits
1 / 2 bits
None / Odd / Even
1 to 31
Device Memory TYPE
00H
01H Read only
02H
03H
04H
05H
06H
07H Double-word
(Underlined setting: default)
Remarks
Remarks