Overview; System Configuration - Hakko Electronics Monitouch V9 Series Connection Manual

1.1

System Configuration

1.1.1

Overview

The V9 series is equipped with seven physical ports consisting of three serial ports, one LAN port, one USB-A port, one USB
mini-B port, and one network communication port
You can use the physical ports to connect a maximum of eight different models of devices and allow the V9 series to
communicate with them at the same time. This is called 8-way communication.
*1 A communication interface unit (CUR-xx, under development) is required to enable network communication.
Physical ports
CUR-xx
CN1 (RS-232C/RS-422/485)
MJ1 (RS-232C/RS-485, 2-wire
Serial
connection)
MJ2 (RS-232C/RS-485, 2-wire
connection)
Ethernet LAN
USB-A
USB
USB mini-B
OPCN-1
T-Link
CC-LINK
Ethernet
Network
PROFIBUS-DP
SX BUS
DeviceNet
FL-Net
 Only the logical port PLC1 can be selected for the following devices and functions. Thus, they cannot be connected at the
same time.
- Devices
Network connection (CUR-xx, under development), without PLC connection, Mitsubishi Electric A-Link + Net10, AB
Control Logix, Siemens S7-200PPI, Siemens S7-300/400 MPI connection
- Functions
Multi-link2, Multi-link, ladder transfer, ladder monitor, MICREX SX variable name cooperation function
CN1
MJ1
V9
MJ2
USB-A
LAN
port1
port2
port3
port4 Select a target for
connection.
port5
port6
port7
port8
Physical Ports
CUR-00 (under
development)
CUR-01 (under
development)
CUR-02 (under
development)
CUR-03 (under
development)
CUR-04 under
development)
CUR-06 (under
development)
CUR-07 (under
development)
CUR-08 (under
development)
*1
. The LAN port can open eight ports simultaneously.
Logical ports
PLC (company A)
PLC1
PLC (company B)
PLC2
Temperature controller (company C)
PLC3
Inverter (company D)
PLC4
Barcode reader (company E)
PLC5
PLC (company F)
PLC6
PLC (company G)
PLC7
PLC (company H)
PLC8
No. of
Ports
8-way Communication
PLC, temperature controller, servo,
1
inverter, barcode reader
PLC, temperature controller, servo,
1
inverter, barcode reader, V-Link,
slave communication (Modbus
1
RTU)
PLC, slave communication (Modbus
8
TCP/IP)
1 Barcode reader
1 -
1 PLC
1.1 System Configuration
Applicable Devices
Other than 8-way
-
Computer (screen program
transfer, MJ1)
Serial printer
Computer (screen program
transfer)
Printer (EPSON ESC/P-R
compatible), USB flash drive,
USB-CFREC-2 (under
development), keyboard, mouse,
USB hub
Printer (PictBridge), computer
(screen program transfer)
-
1-1