Hakko Electronics Monitouch V9 Series Connection Manual page 301

16-48 16. Fuji Electric
Available Device Memory
The available setting range of device memory varies depending on the model. Be sure to set within the range available for the
model to be used. Use [TYPE] when assigning indirect device memory for macro programs.
Device Memory
S (command data)
M (monitor data)
F (basic function)
E (terminal function)
C (control function)
P (motor 1)
H (high level function)
A (motor 2)
o (optional function)
U (user function)
Indirect Device Memory Designation
 When "S" (command data) or "M" (monitor data) is used:
For the device memory address number, specify the value obtained by subtracting "1" from the actual address.
PLC_CTL
Macro command "PLC_CTL F0 F1 F2"
Contents
Reset command
TYPE
00H
01H Double-word, read only
02H
03H
04H
05H
06H
07H
08H
0AH
F0
n Station number
1 - 8
(PLC1 - 8)
n + 1 Command: 0
Remarks
F1 (= $u n) F2
2