Hakko Electronics Monitouch V9 Series Connection Manual page 382

19-2 19. Hitachi
19.1.1 HIDIC-S10/2S10mini
Communication Setting
Editor
Communication setting
Connection Mode
Signal Level
Baud Rate
Data Length
Stop Bit
Parity
PLC
All PLC parameters are fixed to the following settings:
Baud rate: 19200 bps, data length: 8 bits, stop bit: 1 bit, parity: odd
However, when the optional RS-232C/RS-422 module is used, the channel and the protocol must be set using the channel
No./protocol setting switch.
Channel No./Protocol Setting Switch
A maximum of two RS-232C/RS-422 modules (four channels) can be attached to one CPU. When using multiple channels, set
a unique channel number (#1 to #4) for each.
LQE060
MODU NO
LQE160 / LQE165 / LQE560 / LQE565
MODU NO
Item
1 : 1 / Multi-link2 / Multi-link2 (Ethernet)
4800 / 9600 / 19200 / 38400 / 57600 / 115k
8
9
8
9
A
E
Setting
RS-232C / RS-422/485
bps
8 bits
1 bit
Odd
Communication Mode
H-7338 protocol
Communication Mode
H-7338 protocol
(Underlined setting: default)
Remarks
Channel No.
#0
#1
Channel No.
#0
#1
#2
#3