Hakko Electronics Monitouch V9 Series Connection Manual page 101

2-24 2. ALLEN BRADLEY
Calendar
This model is not equipped with the calendar function. Use the built-in clock of the V series.
Available Device Memory
The available setting range of device memory varies depending on the PLC model. Be sure to set within the range available for
the PLC to be used. Use [TYPE] when assigning indirect device memory for macro programs.
N (integer)
B (bit)
T. ACC (timer/current value)
T. PRE (timer/set value)
C. ACC (counter/current value)
C. PRE (counter/set value)
I (input)
O (output)
S (status)
T (timer/control)
C (counter/control)
R (control)
R. LEN (control/data length)
R. POS (control/data position)
D (BCD)
A (ASCII)
F (FLOAT)
ST (STRING)
L (LONG)
Make settings for "Data Files" using the ladder tool. Otherwise, "Error Code 10 00" is displayed on MONITOUCH.
For more information, refer to the PLC manual issued by the manufacturer.
Device Memory TYPE
00H
01H
02H
03H
04H
05H
06H
07H
08H
09H
0AH
0BH
0CH
0DH
0EH
0FH
10H Real number
11H
12H Double-word
Remarks