Facon Fb Series - Hakko Electronics Monitouch V9 Series Connection Manual

14-2 14. Fatek Automation

14.1.1 FACON FB Series

Communication Setting
Editor
Communication setting
Item
Connection Mode
Signal Level
Baud Rate
Data Length
Stop Bit
Parity
Target Port No.
PLC
Make the PLC setting using the configuration tool "PRO_LADDER". For more information, refer to the PLC manual issued by
the manufacturer.
Available Device Memory
The available setting range of device memory varies depending on the PLC model. Be sure to set within the range available for
the PLC to be used. Use [TYPE] when assigning indirect device memory for macro programs.
HR (data register)
DR (data register)
X (input relay)
Y (output relay)
M (internal relay)
S (step relay)
T (timer/contact)
C (counter/contact)
RT (timer/current value)
RC (counter/current value)
DRC (32-bit counter/current value)
*1 For items where double-words can be used (Num. Display, Graph, Sampling), data is processed as double-words.
For those where bits or words can be used, data is processed as words consisting of lower 16 bits.
For input:
For output:
Setting
1 : 1 / 1 : n / Multi-link2 / Multi-link2 (Ethernet) /
1 : n Multi-link2 (Ethernet)
RS-232C / RS-422/485
9600 / 19200 / 38400 bps
7 / 8 bits
1 / 2 bits
None / Odd / Even
1 to 31
Device Memory
Upper 16 bits are ignored.
"0" is written for upper 16 bits.
TYPE
00H
01H
02H WX as word device
03H WY as word device
04H WM as word device
05H WS as word device
06H WT as word device
07H WC as word device
08H
09H
0AH *1
(Underlined setting: default)
Remarks
Remarks