Ethernet Communication - Hakko Electronics Monitouch V9 Series Connection Manual

1. Overview
1-36
1.3.2

Ethernet Communication

Overview
 Because eight communication ports can be opened, the V9 series is allowed to communicate with eight models of PLCs at
the same time.
Company A Company B
 When there are two or more PLCs of the same model, the V9 series is allowed to carry out 1 : n communication via one
single port.
Company A
 If multiple V9 units are connected to one single PLC, the maximum permissible number of these units depends on the PLC
specifications. Refer to the PLC manual issued by the manufacturer.
F A C T O R Y
A C E
PROGRAMMER
IP192.168.1.10
PLC
 You can make settings for Ethernet communication in [Communication Setting] for the logical ports PLC1 - PLC8.
V9
LAN
Port1 Port2 Port3 Port4 Port5 Port6 Port7 Port8
run
Company C
Company E
Company D
V9
LAN
Port1
Port1 Port1
LAN LAN
V9 V9
IP192.168.1.1 IP192.168.1.2
PROGRAMMER PROGRAMMER PROGRAMMER
Company F Company G
* A maximum of 256 units can
be connected to one port.
Ethernet
Ethernet
Port1
LAN
V9
IP192.168.1.3
Ethernet
PROGRAMMER
Company H