2.1.10 NET-ENI (MicroLogix Ethernet TCP/IP)
The V9 series establishes communication with MicroLogix via NET-ENI.
Ethernet
Communication Setting
Editor
Make the following settings on the editor. For more information, see "1.3.2 Ethernet Communication".
IP address for the V9 unit
- When specified on the screen program:
[System Setting] [Hardware Setting] [Local Port IP Address]
- When specified on the V9 unit:
Local mode [LAN Setting]
Port number for the V9 unit (for communication with PLC)
[System Setting] [Hardware Setting] [PLC Properties] [Communication Setting]
IP address and port number (No. 44818) of the PLC
Register on the [PLC Table] in [System Setting] [Hardware Setting] [PLC Properties] [Target Settings].
PLC
NET-ENI / NET-ENIW
ENI / ENIW utility
ENI IP Addr
Press [ENI ROM] to save the settings.
SYSTEM
F 1
V9
F 2
F 3
F 4
F 5
F 6
F 7
192.168.1.11
Item
232 Baud Rate
ENI IP Address
Subnet Mask
Gateway
Make settings in accordance with the network environment.
NET-ENI
RS-232C
RS-232
AB's cable
"1761-CBL-HM02"
192.168.1.10
Setting
Auto
Set the IP address of NET-ENI.
Set the subnet mask of NET-ENI.
2.1 PLC Connection
Micro Logix
Channel0
Remarks
2-33