Dmc50 (Com) - Hakko Electronics Monitouch V9 Series Connection Manual

4-14 4. Azbil
4.2.9

DMC50 (COM)

Communication Setting
Editor
Communication setting
Connection Mode
Signal Level
Baud Rate
Data Length
Stop Bit
Parity
Target Port No.
Sub-station No.
Controller
Rotary address for module address
MODULE ADDRESS
COM module: RS-485 port 1
Make the following settings on the PC loader.
Setting Items
Baud rate (port 1)
Protocol (port 1)
CTRL module: Display communication port
Make the following settings on the PC loader.
Setting Items
Baud rate for display communication
port
* The display communication port is a dedicated port for 1 : 1 communication.
Item
1 : 1 / 1 : n / Multi-link2 / Multi-link2 (Ethernet) /
C
1 to F
9600 bps
19200 bps
38400 bps
1: CPL communication
9600 bps
19200 bps
38400 bps
Setting
1 : n Multi-link2 (Ethernet)
RS-232C / RS-422/485
9600 / 19200 / 38400 bps
8 bits
1 bit
Even
1 to 16
0 to 16
Setting
Contents
Contents
(Underlined setting: default)
Remarks
When connecting to the COM module:
Station number: COM module
Sub-station number: CTRL module
When connecting to the CTRL module:
Station number: CTRL module
Sub-station number: 0
Remarks
Communication is disabled when "0" is set.
(Underlined setting: default)
Remarks
(Underlined setting: default)
Remarks