19-4
19. Hitachi
19.1.2 HIDIC-S10/2, S10mini (Ethernet)
Communication Setting
Editor
Make the following settings on the editor. For more information, see "1.3.2 Ethernet Communication".
IP address for the V9 unit
- When specified on the screen program:
[System Setting] [Hardware Setting] [Local Port IP Address]
- When specified on the V9 unit:
Local mode [LAN Setting]
Port number for the V9 unit (for communication with PLC)
[System Setting] [Hardware Setting] [PLC Properties] [Communication Setting]
IP address and port number of the PLC
Register on the [PLC Table] in [System Setting] [Hardware Setting] [PLC Properties] [Target Settings].
PLC
LQE020
Module No. setting switch
MODU NO
0
2
ET. NET system
Specify the IP address and the subnet mask.
LQE520
Module No. setting switch
MODU NO
0
2
S10V ET.NET system
Specify the IP address and the subnet mask.
Contents
Communication via 10BASE-5
Communication via 10BASE-T
Contents
Communication via 10BASE-5
Communication via 10BASE-T