Micro Logix (Ethernet Tcp/Ip) - Hakko Electronics Monitouch V9 Series Connection Manual

2-26 2. ALLEN BRADLEY
2.1.8

Micro Logix (Ethernet TCP/IP)

Communication Setting
Editor
Make the following settings on the editor. For more information, see "1.3.2 Ethernet Communication".
 IP address for the V9 unit
- When specified on the screen program:
[System Setting]  [Hardware Setting]  [Local Port IP Address]
- When specified on the V9 unit:
Local mode  [LAN Setting]
 Port number for the V9 unit (for communication with PLC)
[System Setting]  [Hardware Setting]  [PLC Properties]  [Communication Setting]
 IP address and port number (No. 44818) of the PLC
Register on the [PLC Table] in [System Setting]  [Hardware Setting]  [PLC Properties]  [Target Settings].
PLC
Channel 1
Channel configuration (channel 1)
Driver
IP Address
Subnet Mask
Gateway Address
Calendar
This model is not equipped with the calendar function. Use the built-in clock of the V series.
Item
Make settings in accordance with the network
Setting
Ethernet
PLC's IP address
PLC's subnet mask
environment.
Remarks