Replacing Consumable Parts; Replacing Absorption Material For The Flushing Box - MUTOH ValueJet VJ-426UF Operation Manual

Replacing consumable parts

3

Replacing consumable parts

Replacing absorption material for the flushing box

The flushing box is a part that keeps receiving ink discharged from the print head. Please replace the absorption material for the
flushing box periodically. If used without replacing, it can cause damage to the print head.
Replacing period:
• Approx. every two months (since it differs depending on usage frequency, please check periodically)
CAUTION
Skin or eye contact with UV curable ink may cause skin inflammation or allergic reaction.
For this operation, be sure to wear the supplied gloves (or solvent resistant gloves) and goggles to prevent ink from contacting
with your eyes or skin.
WARNING
Do not open or close the front cover if you are not in a balanced posture.
If you open or close it in an unbalanced posture, your hands or other body parts could get caught in it, possibly resulting in
serious injury.
1.
Checking steps
[1]
CAUTION
Always open the front cover fully.
If you leave it part-open, it could close suddenly.
100

Replacing absorption material for the flushing box

Open the front cover slowly, holding it by the places shown in the
picture and using both hands.
• Open the front cover fully up as far as it will go.