Attaching And Removing The Battery Pack - NTT docomo FOMA SO906i User Manual

Attaching and Removing the Battery Pack

When attaching/removing the battery pack, make sure to power off and fold the
FOMA terminal.
 If you attach the battery pack forcibly, the terminal on the FOMA terminal may be damaged.
 Holding too hard or attaching/removing the back cover in a manner other than described below
may damage it.
Attaching the battery pack
1
Slide to remove the back
cover in the direction of
the arrow.
3
Align the back cover
with the grooves on the
FOMA terminal while
holding it almost closed
(about 3 mm clearance)
a n d s l i d e i t i n t h e
direction of the arrow.
When you attach the battery pack, make sure that the stopper of the UIM tray is closed. If
the stopper is not closed completely, it prevents the insertion of the battery pack. If you use
force to attach the battery pack, the UIM or stopper may be damaged.
2
Hold the battery pack with the recycle-mark side up, align
the terminal of the battery pack with that of the FOMA
terminal, and push it into place.
Terminal
Removing the battery pack
1
Slide to remove the back
cover in the direction of
the arrow.
2
R a i s e t o r e m ov e t h e
b a t t e r y p a c k i n t h e
direction of the arrow by
holding it by the tab.
Tab
Continued
43