Characters Assigned to Keys (5-touch method)
Character
mode
Kanji/Hiragana mode
Keys
Display character assignments in the reverse order (before acceptance
of characters)/Line feed (after acceptance of characters)
Move cursor left
Move cursor right/Insert half-width space (blank) (only when there is no character after the
cursor)
If you press a key for over a second, the assigned characters are switched one after another.
indicates a space (blank). A space (blank) is provided in two sizes: a full-width and half-
width sizes and counted as one full-width or half-width character.
Characters marked with
Blue colored characters appear in the half-width character mode only.
Every time you press a key, the character changes to the next one that is assigned to that key.
If you press and hold the key, the characters change continuously.
Press
after finalizing a character to start a new line. "
is counted as a full-width character. (After finalizing a character, when the target words are not
displayed, you can also start a new line by pressing
Press
before finalizing a character to insert a voice or semivoice sound symbol. Press
to change its case from upper to lower case or vice versa. Press
assigned to a key in the reverse order.
In the Alphabetic mode, the case attribute of the character entered last or converted by
pressing
450
appear in the full-width character mode only.
is inherited to the next character.
Katakana mode
Alphabetic mode
.)
Numeric mode
– ,
– ,
" appears to indicate it. A new line
to change the character