Adding A Member During Pushtalk Communication - NTT docomo FOMA SO906i User Manual

You cannot use PushTalk to place a call to
emergency numbers (110, 119, and 118).
You cannot set whether to notify the caller ID
when you originate a PushTalk call even if you
add "186/184".
The setting whether to originate a PushTalk call
with/without the caller ID follows the setting of the
Set Notification (P.50).
When you set the Set Notification to [Notify], all
members including added members are notified
the phone numbers of the person who originates
and all members. When you set it to [Not notify],
[User Unset] is displayed in the fields of the
speaker and all members including added
members.
If you set [Call with ID]/[Call without ID] of the
caller ID at the Option call/SMS display when you
originate a PushTalk call, the phone numbers of
yours and all members are/are not notified to all
members based on the selected call condition.
When you originate a PushTalk call, if the Set
Notification is set as well as the Call condition is
set at the Option call/SMS display, the following
priority is applied.
1. Call condition selected at the Option call/SMS
display when originating a PushTalk call
2. Set Notification
Originating a PushTalk Call from
the Call Record
You can originate a PushTalk call using the
Redial and Received records.
 You cannot originate a PushTalk call using the call
records of Number B when 2in1 is used.
Example: Originating a PushTalk call from the Received
record
1
Press ( ) in the stand-by display.
The Received record display appears.
2
Select a received record and press
When a PushTalk call is originated, the signal tone
sounds.
If a member is disconnected during PushTalk
communication among several persons, the
disconnected member can come back to the
session using the Redial/Received record as
long as the other members continue it. When the
PushTalk communication is already ended, the
call is going to be a new one.
82
Adding a Member during
PushTalk Communication
If you originate a PushTalk call, you can add a
member during PushTalk communication.You
can add members up to the maximum number
allowed for communication (up to five persons
including yourself) and also place a second
call to a non-participating member.
Example: Selecting a member from the PushTalk
phonebook
1
P r e s s
communication.
The screen for selecting the method of adding a
member appears.
[View PushTalk PB]:
Select a member from the PushTalk phonebook.
[View phonebook]:
Select a member from the FOMA terminal
phonebook.
[Direct input]:
Enter a phone number directly.
2
Select [View PushTalk PB] and press
To select a member from a group
Press (Group) and select a group.
3
Select a member and press
" " appears for the selected member.
4
Press (Complete).
The Members to add display appears.
.
( A d d ) d u r i n g P u s h Ta l k
.
.