■ Removing
a Push the microSD card lightly and then release it, then pull
the microSD card straight out
✔INFORMATION
・
Note that the microSD card may jump out of the terminal
when removing it.
Battery pack
◆ Attaching/Removing battery pack
・
Attach/Remove the battery pack after turning OFF the
power.
・
When you attach/remove the back cover, hold the terminal
in your hand so that you will not scratch the display etc.
・
If the terminal gets wet, wipe off water before removing the
back cover.
・
Use Battery Pack F29 dedicated to the terminal.
■ Attaching
a Put your fingernail into the back cover removing part and
lift the back cover up to remove.
・
To ensure waterproofness/dustproofness, the back cover
is structured to attach firmly. If you have difficulties to
remove, remove it strongly.
32
Back cover removing part
Before using the terminal