Table of Contents
Advertisement
2
Select a screen memo and press
The screen memo is displayed.
To check the URL
Move the cursor to the screen memo and from
the Function menu, select [URL].
To change the title
Move the cursor to the screen memo and from
the Function menu, select [Edit title]. Enter
the title within 10 full-width or 20 half-width
characters.
To operate the Flash movie or GIF animation
again, from the Function menu, select [Retry]. If
the Flash movie does not operate, either display
the Flash movie entirely or adjust the display
position until it can be played back.
Protecting a Screen Memo
You can protect screen memos from being
overwritten. You can protect up to 50 screen
memos.
1
Select a screen memo from the screen
memo list and press
The Function menu appears.
To cancel the protection
Move the cursor to the protected screen memo
and press
2
Select [Protect ON/OFF]
press
.
The screen memo is protected and " " changes to
" ".
Deleting a Screen Memo
You can delete screen memos using three
methods.
Example: Deleting a screen memo
1
From the i-mode menu, select [Screen
Memo] and press
To delete all screen memos
From the Function menu, select [Delete]
[Delete all], enter the Security code, and select
[Yes].
To delete several screen memos
From the Function menu, select [Delete]
[Select&delete], select screen memos, press
(Complete), and select [Yes].
170
(Func).
(Func).
[Yes] and
.
2
.
Select a screen memo and press
(Func).
The Function menu appears.
3
Select [Delete]
and press
The selected screen memo is deleted.
Obtaining Graphics from a
Site
You can obtain images and frames from sites
and screen memos, and save them in My
picture.
You can save up to 100K bytes for each image
entry. The number of images that you can save
varies depending on the free memory space on the
place to save to and data size.
Example: Saving a graphic displayed in a site
1
While displaying a site, press
The Function menu appears.
2
Select [Save image] and press
To save the background image
Select [Save backgnd img].
3
Select [Save]
The selected image is displayed in a frame and the
screen for selecting the place to save to appears.
[Data Box]:
Save an image in the Data Box. Select a folder to
save to.
[microSD]:
Save an image in the microSD card.
To perform the Display setting after saving an image
Select [Save&setting]
save to
To save the frame/stamp/Deco-mail pictogram
Select [Save]
in an appropriate folder in My picture of the Data
Box.
[Delete one]
.
<Save image>
a graphic and press
an image
the Display setting.
an image. The image is saved
[Yes]
(Func).
.
.
a place to
Advertisement
Chapters
Table of Contents
