NTT docomo FOMA SO906i User Manual page 110

2
Select [Yes] and press
The Melody Call site is connected.
3
Set each item.
 For details how to set, see the "Mobile Phone
User's Guide Network services ".
When a call is a videophone or PushTalk call, the
Melody call does not sound.
When you select the Melody Call, the FOMA
terminal is connected to the i-mode site and
packet communication charge is required.
However, when you connect to the setting site,
the packet communication is free of charge.
Muting the Ring Tone
All sounds from the FOMA terminal can be
disabled to avoid disturbing others by using
the Manner mode.
There are three types of the Manner mode. Set
the mode by using the Manner mode setting
(P.109).
 Even if the Manner mode is set, the shutter sound of
the camera can be heard.
1
Press for over a second in the
stand-by display.
The Manner mode is set and the icon for the current
type appears.
Manner (
Silent
Original manner (
To cancel the Manner mode
Press for over a second in the stand-by
display. The Manner mode is canceled and " /
/ " disappears.
108
.
<Manner mode>
is pink)
is blue)
Functions of each mode
Manner Silent
Vibrator Follow each OFF
(P.103) 1 setting
(Vibrates
in Pattern1
when [OFF]
is set.)
Phone OFF OFF
volume
(P.103) 2
Mail OFF OFF
volume
(P.103) 3
Alarm OFF OFF
volume
(P.380,
384)
Keypad OFF OFF
sound
(P.104) 4
Charge OFF OFF
sound
(P.104) 5
Battery OFF + OFF
ALM Vibrator
(P.47) 6
Whisper ON OFF
mode
(P.69)
1 Vibrator setting common to voice, videophone,
and PushTalk calls, mail, Message R/F, Alarm,
Schedule alarm, and Booking alarm.
2 Setting common to the ring volume for voice,
videophone, and PushTalk calls and the alarm for
the Call cost limit.
3 Setting common to the ring volume for mail and
Message R/F.
4 Setting common to the battery level confirmation
beep.
5 Setting common to the Start charge sound and Full
charge sound.
6 During a call, the battery alarm is heard from the
earpiece regardless of the setting. When a call is
put on hold, however, only the display is provided
and the battery alarm does not sound.
7 When the Battery ALM is set to [ON], the vibrator
operates regardless of the Vibrator setting.
Original manner
Initial Setting
setting range
OFF Pattern1/
Pattern2/
Link melody/
Follow each
setting/OFF
4 SU (STEP
UP)/
SD (STEP
DOWN)/
6 to 1/OFF
4 SU (STEP
UP)/
SD (STEP
DOWN)/
6 to 1/OFF
4 SU (STEP
UP)/
SD (STEP
DOWN)/
6 to 1/OFF
1 2 to 1/OFF
ON ON/OFF
ON 7 ON/OFF 7
OFF ON/OFF