Table of Contents
Advertisement
Updating the Management
Information of the microSD card
If you edit, add, or delete data stored in the
microSD card on a device other than the FOMA
terminal, it may not be displayed correctly on
the FOMA terminal. If this happens, update
the information of the management file in the
microSD card.
1
Press
(Func) in the microSD category
list.
The Function menu appears.
2
Select [Update mng. info] and press
The Update mng. info display appears.
3
Select a category to be updated, press
, and press
The screen for confirming whether to update the
management information appears.
4
Select [Yes] and press
The management information is updated. While the
management information is updated, " " appears.
If any data in the microSD card has a file name
that is not supported by the FOMA terminal,
the file name is changed when you update the
management information.
If you update the management information while
the screen for confirming whether to save the
recorded images is displayed, the image that is
being confirmed is discarded when the microSD
card is set as the place to save to.
332
(Complete).
.
Using the FOMA Terminal
with a PC
When you connect the FOMA terminal to a
PC using the FOMA USB Cable with Charge
Function 01/02 (optional), you can use it as
an external drive to read/write data on the
microSD card.
You can change the USB mode setting before
connecting the FOMA terminal to a PC.
If the FOMA terminal is not connected to a PC
correctly or the battery level is very low or 0, not only
data cannot be sent/received, but also it may be lost
in some cases.
.
Do not unplug the FOMA USB Cable with Charge
Function 01/02 (optional) during reading/writing
data. If you do so, not only data cannot be sent/
received, but also it may be lost in some cases.
The operating environment for using the FOMA
terminal connected to a PC is as follows.
Item
Connection
F O M A U S B C a b l e w i t h C h a r g e
cable
Function 01/02 (optional)
PC main unit PC with a USB port (Universal Serial
Bus Specification 1.1/2.0 compliant)
that can be used to connect the
F O M A U S B C a b l e w i t h C h a r g e
Function 01/02 (optional)
OS
Windows 2000 (SP3 or later) ,
Windows XP,
Windows Vista (Japanese version)
[Communication mode] and [microSD mode] are
supported.
1
From the Menu, select [Settings]
[Management]
press
.
[Communication mode]:
Perform packet and 64K data communication,
and send/receive data (OBEX™ communication).
[microSD mode]:
Read and write data from/to the microSD card.
[MTP mode]:
Transfer music data (WMA file) from a PC to the
microSD card.
<USB mode setting>
Required environment
[USB mode setting] and
Advertisement
Chapters
Table of Contents
