NTT docomo FOMA SO906i User Manual page 68

Setting the Alarm When Reconnecting
a Dropped Call
This function automatically reconnects the call
interrupted during a voice, videophone, or
PushTalk call due to the radio wave condition,
such as in a tunnel or between buildings, right
after the radio wave condition is recovered.
You can set an alarm tone when a call is
reconnected.
1
From the Menu, select [Settings]
[Call setting]
press .
[High]:
Sound the high alarm tone.
[Low]:
Sound the low alarm tone.
[OFF]:
Do not sound the alarm tone.
2
Select the type of the alarm tone and
press .
The alarm tone during reconnection is set.
The recipient does not hear any sound while the
radio wave is interrupted.
The time required for reconnection depends
on the usage and radio wave condition. The
average reconnection time is about 10 seconds
and the caller is charged for the time spent for
reconnection.
Improving Voice Clarity by Suppressing
Background Noise
You can suppress background noise during
a voice or videophone call or during playing
back an answering message set for the record
message.
1
From the Menu, select [Settings]
[Call quality]
press .
[ON]:
Suppress background noise.
[OFF]:
Do not suppress background noise.
2
Select [ON]/[OFF] and press
The Noise reduction is set.
66
<Reconnect alarm>
[Call]
[Recnct ALM] and
<Noise reduction>
[Call]
[Noise reduction] and
.
Talking Hands-free While
Driving
You can place or receive a voice call using a
hands-free device by connecting the FOMA
terminal to a device such as the In-Car Hands-
Free Kit 01 (optional) or car navigation system.
For details about the operation of the hands-
free device, see the user's manual of the
device. When you use the In-car Hands-free
Kit, you need the FOMA In-Car Hands-Free
Cable 01 (optional).
The incoming call display and ring tone operation
follow the FOMA terminal settings.
When a setting is made for hearing sound from
the hands-free device, a ring tone sounds from
the hands-free device even if the FOMA terminal
is set to the Manner mode or its Ring volume is
set to [OFF].
Even if you connect the FOMA terminal to a
hands-free device, the Public mode (Drive mode)
and Record message function operate normally.
When a setting is made for hearing sound
from the FOMA terminal, the operation when
the FOMA terminal is folded or switched to the
Media style during a call follows the Setting when
folded. When a setting is made for hearing sound
from the hands-free device, the call continues
even if the FOMA terminal is folded or switched
to the Media style regardless of the setting of the
Setting when folded.
When you use the In-Car Hands-Free Kit 01,
" " appears. If you use any other commercially
available car adapter, " " may appear.
<Hands-free mode>