Composing And Sending Sms - NTT docomo FOMA SO906i User Manual

Setting to Save Receiving Entry
Except Early Warning "AreaMail"
You need to save a name and Message ID of
Area Mail including information you want to
receive rather than Area Mail of the emergency
information. To receive emergency information,
you do not need to save receiving entry.
1
From the Mail menu, select [Mail setting]
[Area Mail setting]
and press
To edit the settings of the set entry
Move the cursor to the set entry, press
and enter the Security code. Edit each item.
To delete the set entry
Move the cursor to the set entry, press
(Delete), enter the Security code, and select
[Yes].
2
Press (Create).
The Security code screen appears.
3
Enter the Security code and press
(OK).
[Area Mail name]:
Enter the name you like within 15 full-width or 30
half-width characters.
[Message ID]:
Enter the Message ID provided by a service
provider.
4
Enter each item.
5
Press (Complete).
The entered entry is saved.
You cannot edit/delete the pre-saved [Emergency
information].
214
[Receive entry]
.
Setting the Operation While
Receiving Early Warning "AreaMail"
You can set the ring time of the beep when
you receive Area Mail of the urgent earthquake
news flash. The Beep time is set to [10sec] at
the time of purchase.
1
From the Mail menu, select [Mail setting]
[Area Mail setting] and press
2
Enter the ring time of the beep at [Beep
time].
(Edit),
Enter the ring time within 01 to 30 seconds.
Composing and Sending
SMS
Regardless of whether you subscribe to
i-mode, you can send/receive text messages
between FOMA terminals.
 You can exchange SMS with recipients/senders
who subscribe to an overseas telecommunication
company other than DoCoMo. See the NTT DoCoMo
website for infor mation about countries and
overseas telecommunication companies you can
use for sending/receiving SMS.
 Even if the Notify caller ID is set to [Not notify], an
SMS recipient is notified of the sender's phone
number.
 The text of sent message may not be displayed
correctly on the recipient's terminal depending on
the radio wave condition or the type of characters to
be sent.
1
From the Mail menu, select [Compose
SMS] and press
.
<Compose and send SMS>
.