NTT docomo FOMA SO906i User Manual page 80

Setting How to Answer a
Videophone Call during i-mode
You can set how to answer a videophone
c a l l re c e i v e d d u r i n g i - m o d e o r p a c k e t
communication, for example, sending or
receiving mail.
1
From the Menu, select [Settings]
[Videophone]
and press
[Prefer V.phone]:
Receive a videophone call. When you answer the
videophone call, the packet communication in
progress is disconnected.
[Prefer packet]:
Continue the packet communication without
receiving a videophone call. The received call is
saved in the Received record.
[V.ph voicemail]:
Connect a received videophone call to the Voice
Mail Service Center.
[Call forwarding]:
Connect a received videophone call to a
forwarding phone number.
2
Select the operation to be performed
when you receive a videophone call
during i-mode communication and press
.
The V.ph while packet is set.
78
[V.ph while packet]
.
Setting Notice for Switching between Voice
and Videophone Calls
You can set whether to notify the recipient/
caller that the FOMA terminal is capable of
switching between voice and videophone calls.
 You cannot perform this setting when you are
[Call]
outside of the service area or in a place where
radio waves do not reach, or during a voice or
videophone call.
Example: Notifying
1
From the Menu, select [Settings]
[Management]
switch notice] and press
2
Select [Indication ON]
.
When you do not want to notify
Select [Indication OFF]
To check the setting
Select [Check setting].
<Videophone switch notice>
[NW Services] [V.ph
.
[Yes] and press
[Yes].