NTT docomo FOMA SO906i User Manual page 480

2
Select the date/time to be reserved
The FOMA terminal connects to the server and completes the reservation.
When the Reserved Time Comes
The software update may not start if another function is being used when the reserved time
comes.
When the Alarm/Schedule alarm/Booking alarm is set to start at the same time as the
reserved time, the software update has priority and the alarm may not sound.
If you execute the Reset all data&set or leave the FOMA terminal without a battery pack
or with a fully expended battery pack for a long period of time after you complete the
reservation, the date and time is reset, and the software update does not start even if the
reserved time comes. Perform the reservation again.
Confirming the Reservation
1
From the Menu, select [Settings]
press .
The Security code screen appears.
2
Enter the Security code and press
3
Select [Update] and press
478
The screen to the left appears. After about five seconds, the software
update starts automatically and the incoming indicator flashes.
 Before the reserved time comes, turn the FOMA terminal to the stand-by
display and place it in a location of good radio wave condition.
.
If the software update is already reserved, the reserved information
appears.
To change the reservation
Select [Change]. The FOMA terminal connects to the server and you
can select another date/time.
To cancel the reservation
Select [Cancel]
and cancels the reservation.
[Yes] and press
[Management]
(OK).
[Yes]. The FOMA terminal connects to the server
.
[SW Update] and