Table of Contents
Advertisement
5
Select a ring tone from MUSIC/i-motion/
Melody of the Data Box at [Ring tone].
You can set the following files. You can select a
®
Chaku-Uta
from [i-motion].
File
Category
format
MUSIC
AAC-LC/
HE-AAC
i-motion
MP4
Melody
SMF/
MFi
Some files may not be set. You cannot set an
i-motion with video track only. You can set only
an i-motion with sound track only (i-motion
without video track, such as singer's voice) for
incoming PushTalk calls.
When you select a Chaku-Uta Full
choice of specified playback ranges from [MUSIC]
The screen for selecting a type of setting
appears. If you select [Full song], the entire track
®
of Chaku-Uta Full
is set for the ring tone. If you
select [Point], the specified playback range of
®
Chaku-Uta Full
is set for the ring tone.
To mute the ring tone
Select [Silent].
To check the ring tone
Move the cursor to the ring tone and press
(Play).
6
Set the volume of the ring tone at [Ring
volume].
Select from [STEP UP], [STEP DOWN], [OFF], and [1
to 6].
[STEP UP] turns up the volume every six seconds
and [STEP DOWN] turns down the volume every
six seconds.
To set the ring tone volume to [OFF]
Press
at level 1. When you set the ring tone
volume for incoming calls, incoming mail, or both
incoming calls and mail to [OFF], "
" " appears in the stand-by display respectively.
File size
Image size
Max. 5M
bytes
Max. 10M
Max. [VGA(640
bytes
480)]
Max. 350K
bytes
®
that has a
", "
", or
7
Set a vibration pattern at [Vibrator].
[Pattern1]:
Set a short intermittent vibration.
[Pattern2]:
Set a long intermittent vibration.
[Link melody]:
Set vibration to be synchronized with the
vibration pattern of the melody. When you set the
ring tone to [Silent] or the melody is not specified
with a vibration pattern, [Pattern1] is used.
[OFF]:
Do not set the vibrator.
When you set the vibrator for incoming calls,
incoming mail, or both incoming calls and mail,
" ", " ", or " " appears in the stand-by display
respectively.
To check the vibration
Move the cursor to the vibration pattern and
press
(Confirm).
8
Select an indicator color at [Color].
Select from 12 colors plus [C13:ALL] (in which the
12 colors flash in turn).
When you move the cursor through the colors, the
incoming indicator flashes accordingly.
9
Select [Ring time] and press
You can set the ring time for incoming mail,
Message R, and Message F.
10
Select [ON]/[OFF] of the ring tone at [Set].
11
Enter the duration for sounding the ring
tone at [Ring time].
Enter the duration within the range from 01 to 30
seconds.
12
Press
(Complete).
The Ring time is set.
.
103
Continued
Advertisement
Chapters
Table of Contents
