NTT docomo FOMA SO906i User Manual page 64

4
Select another call condition and press
(Call).
The call is dialed according to the selected Chaku-
moji message and call condition.
When a Chaku-moji is received by the recipient,
" " appears in the sender's terminal display and
charge is required.
If the recipient does not receive the Chaku-moji,
" " appears. In this case, there is no charge.
(For example, when the recipient's terminal does
not have Chaku-moji support or if the Chaku-moji
was received in a condition other than that set
using the Set Message display menu.)
If the recipient's terminal has the following
settings or conditions, Chaku-moji cannot be
delivered to this recipient and the call is not
saved in the Received record of the recipient's
terminal. " " or "
sender's terminal and there is no charge for this
transmission.
- When the recipient's terminal is outside of the
service area
- When the recipient's terminal is powered off
- When the Public mode (Drive mode) is set
- When the To answer the Record message is
set to 0 seconds, etc.
Even if a Chaku-moji was delivered successfully
to the recipient, "
displayed in the sender's terminal display
depending on the radio wave condition. In this
case, charge is required.
If you place a videophone call with a Chaku-moji
while the Auto redial(voice) is set to [ON], the
Chaku-moji is sent even when this call is redialed
as a voice call.
62
" is not displayed on the
" or " " may not be
Changing the Caller ID Setting ON/
OFF for an Individual Call
You can choose whether to notify a recipient of
your phone number (caller ID) every time you
place a call.
 The caller ID is important personal information.
Carefully decide whether you want to notify a
recipient of your caller ID.
You can use the following methods to notify or
not notify your caller ID.
Presetting Use the Set Notification to set [Notify]/
for all calls [Not notify] (P.50).
Setting A d d " 1 8 6 / 1 8 4 " t o t h e r e c i p i e n t 's
in the phone number when you save it in the
Phonebook Phonebook (P.91).
Setting Set [Call with ID]/[Call without ID] at the
when you Caller ID of the Option call/SMS display
place a call after dialing a recipient's phone number
(P.63).
E n t e r " 1 8 6 / 1 8 4 " b e f o r e d i a l i n g a
recipient's phone number (P.55).
To notify the caller ID
Press 186 + Phone number +
Not to notify the caller ID
Press 184 + Phone number +
When you place a call by pressing
dialing a phone number with "186/184", the
phone number is saved in the Redial record with
"186/184".
You cannot set whether to notify the caller ID
when you originate a PushTalk call even when
you add "186/184".
Placing a Call by
Specifying a Condition
When you place a call, you can set a call
condition at the Option call/SMS display such
as selecting a call type, whether to notify a
recipient of your phone number for each call,
or using Chaku-moji.
<186/184>
.
.
after