Table of Contents
Advertisement
7
Click [
] and set a host (APN) and click [OK].
Set 2 or a number between 4 and 10 for cid.
8
Select the newly added host (APN) and click [OK].
9
Click [
].
10
Set [
ID] and [
To set [
ID] and [
information supplied by your provider accurately with
careful attention to the letter case.
11
Check the setting information and click [
12
Click [OK].
] and click [
].
], enter the appropriate
].
16
Easy Setup (64K Data Communication)
When Using "mopera U" or "mopera"
Note that 64K data communication could be expensive if it is
performed for a long period of time.
1
Start the FOMA PC setup software and click [
].
2
Select [64K
3
Select [ mopera U
] and click [
].
When you select [ mopera U
window for subscription appears. If you have already
subscribed to "mopera U", click [
4
Enter a host name (any name) at [
[
].
You cannot enter half-width characters, "¥" "/" ":" " " "?"
"<" ">" "|" """ and "!".
If [FOMA SO906i] is not set for [
[FOMA SO906i].
To connect to "mopera U" or "mopera", your caller ID
must be notified. Select [186
5
Set [
ID] and [
You can connect with [
blank.
6
Check the setting information and click [
7
Click [OK].
] and click [
].
] or [ mopera
], the confirmation
].
] and click
], select
].
] and click [
ID] and [
] left
].
].
Advertisement
Chapters
Table of Contents
