Changing The Security Code; Puk Code - NTT docomo FOMA SO906i User Manual

PIN2 is a 4- to 8-digit number (code) that must
be entered in order to reset the total call cost,
use a user certificate, or request the issue of a
user certificate.
 If you continue to use the current UIM with a newly
purchased FOMA terminal, use the previous PIN1
and PIN2 codes you set for the UIM.
When the PIN1 or PIN2 code input screen appears,
enter the 4- to 8-digit PIN1/PIN2 code and press
(OK).
 The entered PIN1/PIN2 code is displayed as
asterisks ( ).
 If you enter a wrong PIN1/PIN2 code three times
consecutively, the PIN1/PIN2 code is locked and
cannot be used anymore. ("X times left" appears
on the screen, indicating the remaining number
of times for retry operation.)
When you enter the correct PIN1/PIN2 code, the
number of times left is reset to 3.

PUK Code

T h e P U K c o d e i s a 8 - d i g i t n u m b e r f o r
canceling the locked PIN1/PIN2 code. The
PUK code cannot be changed by yourself.
 I f y o u e n t e r a w r o n g P U K c o d e 1 0 t i m e s
consecutively, the UIM is locked.
Security provided
when you power on the
FOMA terminal
Enter the PIN1 code
Enter the PUK code
Correct
input
Enter a new
PIN1/PIN2 code
User certificate operation
Connection to a
FirstPass-compatible site
Enter the PIN2 code
Consecutive three
times incorrect input
Consecutive
10 times
incorrect input
Contact the nearest
DoCoMo shop
Changing the Security
Code
1
From the Menu, select [Settings]
[Management]
press .
2
Enter the current Security code and press
(OK).
The entered Security code is displayed as asterisks
( ).
3
Enter the new Security code and press
(OK).
Enter a 4- to 8-digit code.
4
Select [Yes] and press
The Security code is changed.
Setting the PIN Code
You can set the FOMA terminal to require the
PIN1 code input when powered on. You can
change the PIN1 and PIN2 codes.
1
From the Menu, select [Settings]
[Management] [UIM setting] and press
.
The Security code screen appears.
2
Enter the Security code and press
(OK).
3
Select [ON]/[OFF] at [PIN1 code setting].
[ON]:
You need to enter the PIN1 code when the FOMA
terminal is powered on.
[OFF]:
Do not need to enter the PIN1 code when the
FOMA terminal is powered on.
<Change code>
[Change code] and
.
<UIM setting>
Continued
123