Table of Contents
Advertisement
Changing the i-mode Host (ISP
Connection Communication)
You do not need to change the Host setting
when using the i-mode service of DoCoMo.
You can set up to 10 hosts for receiving
services other than the services provided by
i-mode (DoCoMo). When you change a host
to other than [i-mode(UIM)], you cannot use
i-mode.
You must always enter [Host name], [Host number],
and [Host address].
1
From the i-mode menu, select [i-mode
setting]
[Common setting]
selection] and press
To edit the settings of the set host
Move the cursor to the set host and from the
Function menu, select [Edit], and enter the
Security code. Edit each item.
To delete the set host
Move the cursor to the set host and from the
Function menu, select [Delete one], enter the
Security code, and select [Yes].
2
Press
(Create).
The Security code screen appears.
3
Enter the Security code and press
(OK).
[Host name]:
Enter a host name within eight full-width or 16
half-width characters.
[Host number]:
Enter a host number within 99 half-width
alphanumeric characters and symbols.
[Host address]/[Host address2]:
Enter a host address within 30 half-width
alphanumeric characters and symbols.
174
[Host
.
4
Enter each item.
5
Press
(Complete).
The entered host is saved.
6
Select the host and press
The host is changed.
Note that packet communication is not covered
by the Pake-Houdai/Pake-Houdai Full service if a
host of the packet communication is set to other
than [i-mode(UIM)].
Setting Whether to Use the Terminal
Information Data for Flash Movies
You can set whether to use the terminal
information data (P.166) when you play back
a Flash movie displayed on a site or mail, or
saved in the Screen Memo.
1
From the i-mode menu, select [i-mode
setting]
[Use phone information] and
press
.
2
Select [Yes]/[No] and press
The Use phone information is set.
Disabling the Display of Graphics
You can set whether to display graphics when
displaying sites or screen memos.
1
From the i-mode menu, select [i-mode
setting]
[Display img] and press
2
Select [ON]/[OFF] and press
The Display img is set.
When set to [OFF], "
graphic.
Some graphics may not be displayed correctly
even if the Display img is [ON].
The setting of the Display img is synchronized
with that of the Display img of 1Seg (P.286).
.
.
.
.
" is displayed instead of a
Advertisement
Chapters
Table of Contents
