Table of Contents
Advertisement
2
Set each item.
Menu item
Activate
Select [Activate]
[ S e t + A c t i v a t e ] (
forwarding number and ring time)
[Yes].
When you select [Set+Activate],
When 2in1 is set to the B mode,
Deactivate
Select [Deactivate]
Change FWD
Select [Change FWD number]
number
(within 26 digits)
[Set+Activate].
When 2in1 is set to the B mode,
If FWD number
Set whether to connect to the
busy
Voice Mail Service Center when the
forwarding number is busy.
Select [If FWD number busy]
connect]/[Connect].
Check setting
Select [Check setting].
When 2in1 is set to either the
When 2in1 is set to the Dual mode, the screen for
selecting either Number A or Number B appears.
To set on/off of the Call Forwarding guidance,
press
display and operate as instructed by the
guidance.
412
Operation
[Activate]/
E n t e r t h e
y o u c a n s e t t h e f o r w a rd i n g
number (within 26 digits) and
ring time (000 to 120 seconds)
and activate the Call Forwarding
Service.
you cannot select the method of
activating the Call Forwarding
Service.
[Yes].
Enter the forwarding number
Select [Set]/
select [Change FWD number]
enter the forwarding number
(within 26 digits)
select [Yes].
B or Dual mode, the screen for
selecting either Number A or
Number B appears.
in the stand-by
Using the Nuisance Call
Blocking Service
The Nuisance Call Blocking Service prevents
receiving a "nuisance call" such as prank
phone calls. When you set the Bar Nuisance
Calls, further calls from registered nuisance
call numbers are automatically rejected and
the call rejection guidance is played back on
the caller's phone.
The ring tone does not sound when there is an
incoming call from the saved phone number. The
call is not saved in the Received record, either.
When you receive a videophone call from a caller
who is saved as a nuisance caller, it is disconnected
after playing back the call rejection video guidance
on the caller's phone.
1
From the Menu, select [Settings]
[Management]
Nuisance Calls] and press
2
Set each item.
Menu item
Register Caller
[Not
Reg. selected
No.
Delete all entries Select [Delete all entries]
Delete last entry D e l e t e t h e l a s t s a v e d p h o n e
Check No. of
entry
[NW Services]
.
Operation
Save the phone number of the last
received call.
Select [Register Caller]
Select [Reg. selected No.]
the phone number (within 22 digits)
Select [Yes].
number. You can delete another
p h o n e n u m b e r f r o m t h e l a s t
saved one by repeating the same
operation.
Select [Delete last entry]
Select [Check No. of entry].
[Bar
[Yes].
Enter
[Yes].
[Yes].
Advertisement
Chapters
Table of Contents
