Putting A Call On Hold - NTT docomo FOMA SO906i User Manual

2
Select the Setting when folded at [Voice
call/V.phone].
[Holding]:
Put the call on hold. Both you and the recipient
hear the Holding tone set at the holding
setting (P.70). The holding image set at the
Holding setting is sent to the recipient during a
videophone call.
[Mute]:
Put the call on hold with the voice muted. During
a videophone call, a substitute image is sent to
the recipient (P.77).
[Disconnect]:
Hang up the call.
The Setting when folded during a voice or
videophone call is set.
The setting when the FOMA terminal is switched
to the Media style during a voice/videophone call
or PushTalk communication follows the Setting
when folded.
When the Flat-plug Earphone/Microphone with
Switch (optional) is connected, the Setting when
folded is disabled and the call continues even
if you fold the FOMA terminal. If it is during a
videophone call that you fold the FOMA terminal,
a substitute image is sent.
Using the Low Voice
Feature
You can set the FOMA terminal so that the
recipient can hear your voice at a normal
volume level even if you speak in low voice
during a voice call.
1
Press during a call.
The call is switched to the Whisper mode and the
message "Whisper mode" is displayed.
To cancel the Whisper mode
Press again.
 When you finish a call, the Whisper mode is
canceled automatically.

Putting a Call on Hold

during a Call
The call can be put on hold during a voice or
videophone call so that your voice cannot be
heard by the recipient.
 Even if the call is put on hold, the caller is charged
for the call.
1
Putting a Call on Hold
If you cannot answer a voice or videophone
call immediately, you can put the call on hold.
 Even if the answer is put on hold, the caller is
charged for the calling charge.
Example: Putting a voice call on hold
1
<Whisper mode>
Press (Func) during a call, select
[Holding], and press
Both you and the recipient hear the holding tone set
at the Holding setting (P.70). The holding image set
at the Holding setting is sent to the recipient during
a videophone call.
To cancel the Holding
Press .
When receiving a call, press
The answer is put on hold.
The recipient hears the On hold tone set at the On
hold setting (P.70). The On hold image set at the
On hold setting is sent to the recipient during a
videophone call.
 If you press
while the call is put on hold, the
call on hold is disconnected.
<Holding>
.
<On hold>
(HLD).
Continued
69