Table of Contents
Advertisement
Using the Voice Mail Service
The Voice Mail Service takes messages for
you, as long as it answers a call with the
answering message, if there is an incoming
voice or videophone call when you are in a
location without the radio wave, while the
FOMA terminal is powered off, or when you are
in a situation where you cannot answer a call.
When the Voice Mail Service and Record Message
(P.73) are set simultaneously, and if you want to give
priority to the Voice Mail Service, set the ring time for
the Voice Mail Service shorter than the time before
starting the answering message for the Record
Message.
When the Voice Mail Service is set to "Activate"
and if you do not answer an incoming voice or
videophone call, the call is saved in the Received
record as a "Missed call" and the notification icon
" " (Missed call) appears in the stand-by display.
When the Call Forwarding Service is set to "Activate",
the Voice Mail Service is automatically deactivated.
Basic flow of the Voice Mail Service
Step 1
Activate the service.
Step 2
The caller leaves a message.
Step 3
Play back the Voice Mail message.
1
From the Menu, select [Settings]
[Management]
Mail] and press
2
Set each item.
Menu item
Activate
Select [Activate]
[Ring+Activate] (
time)
When you select [Ring+Activate],
When you select [Ring+Activate],
When 2in1 is set to the B mode,
Set ring time
Select [Set ring time]
ring time (000 to 120 seconds)
410
[NW Services]
.
Operation
[Activate]/
Enter the ring
[Yes].
you can set the ring time (000 to
120 seconds) and activate the
Voice Mail Service.
t h e Vo i c e M a i l S e r v i c e i s
activated by Number A.
you cannot select the method of
activating the Voice Mail Service.
Enter the
(Complete).
Menu item
Deactivate
Check setting
Play messages
Voice Mail
setting
Check
messages
Tone/Vibrate
notice
(Default: ON)
[Voice
Delete VM icon
Missed
Activate
Call
notice
Deactivate Select [Missed Call notice]
Check
setting
When 2in1 is set to the Dual mode, the screen for
selecting either Number A or Number B appears.
Operation
Select [Deactivate]
[Yes].
Select [Check setting].
When 2in1 is set to either the
B or Dual mode, the screen for
selecting either Number A or
Number B appears.
Select [Play messages]
Operate as instructed by the
guidance.
The number of "
" (Voice Mail
message) is the number that
the guidance announces when
playing back new Voice Mail
messages. Already saved Voice
Mail messages are not included.
You can also play back the
record message by pressing
(Link) in the stand-by display and
selecting " ".
Select [Voice Mail setting]
Operate as instructed by the
guidance.
Select [Check messages].
When a new message is stored
at the Voice Mail Service Center,
the notification icon "
Mail message) appears in the
stand-by display.
Set whether to alert you of a new
message with the mail tone when it
is received at the Voice Mail Service
Center.
Select [Tone/Vibrate notice]
[ON]/[OFF].
Select [Delete VM icon]
Notify you of a new message by
SMS when it is received while the
FOMA terminal is powered off or
outside of the service area.
Select [Missed Call notice]
[Activate]
[All calls]/[With Caller
ID]
[Yes].
[Deactivate]
[Yes].
Select [Missed Call notice]
[Check setting].
[Yes]
[Yes]
" (Voice
[Yes].
Advertisement
Chapters
Table of Contents
