Before Using 1Seg - NTT docomo FOMA SO906i User Manual

The saved information may be displayed, or be
sent to TV broadcasters (broadcast stations)
without another input of information when you
browse to the data broadcasting site.
To delete information in the broadcast storage
area, see P.285.
When you replace the UIM with another one,
the screen for confirming whether to reset the
broadcast storage area appears. Select [Yes]
to reset it.
Using information in the broadcast storage
area
When information in the broadcast storage area
is used while you are watching a program, the
message "Use saved info? It may include info
used by the same broadcasting gr." appears.
When you select [Yes], the confirmation screen
does not appear as long as you watch the
same program. If you select [Yes,from then
on], the confirmation screen no longer appears
even if the program is changed.
Other Features
One-touch channel selection by the remote-
control numbers (P.270)
12ch. viewer (P.271)
Recommend prog. (P.272)
Switching between the main sound and sub
sound (P.274)
Using the program guide i- ppli (P.275)
Setting a timer for watching (P.275)
Setting a timer for recording (P.275)
Displaying and using the data broadcasting
(P.281)
Using TVlink (P.282)
Recording a video and still image (P.282)
Time shift play while watching (P.283)
15-second skip (P.323)
Rapid play with sound at about 1.3x speed
(P.323)

Before Using 1Seg

Step to Watch 1Seg
Example: When you watch 1Seg for the first time
Step 1
Set channel list (P.267)
Save a channel list suitable for the
area you use.
Step 2
Activate 1Seg (P.269)
Extend the 1Seg Antenna and activate
1Seg.
1Seg Antenna
When you use the 1Seg function, extend the
1Seg Antenna as illustrated below. When the
1Seg reception is poor, change the direction of
the 1Seg Antenna or the location of the FOMA
terminal.
 Do not use force to change the direction of the 1Seg
Antenna.
Using the 1Seg Antenna
1
Pull out the 1Seg Antenna.
2
Raise the 1Seg Antenna.
3
Change the direction.
2
1
3
3
265
Continued