Table of Contents
Advertisement
Command
AT+CREG=<n>
n=0
[&F][&W]
n=1
AT+GMI
AT+GMM
AT+GMR
AT+IFC=<n,m>
n=0
n=1
n=2
m=0
m=1
[&F][&W]
m=2
AT+WS46=<n>
[&F][&W]
n=22
AT¥S
AT¥V<n>
n=0
[&F][&W]
n=1
ATA
ATD
ATE<n>
n=0
[&F][&W]
n=1
ATH
ATI<n>
n=0
n=1
n=2
ATO
ATQ<n>
n=0
[&F][&W]
n=1
ATS0=<n>
n=0
[&F][&W]
n=1-255
Outline/Parameter
Sets whether the outside/inside of the service area information is
displayed.
When you enter AT+CREG?, the result is displayed in the "+CREG:
<n>,<stat>" format.
stat=0: Outside of the service area, stat=1: Inside of the service
area (home), stat=4: Unknown, stat=5: Inside of the service area
(visitor)
Does not display (Default).
Displays.
Displays the name of the FOMA terminal manufacturer.
Displays the name of the FOMA terminal.
Displays the version of the FOMA terminal.
Sets the local flow control method between the PC and the FOMA
terminal.
n is used for setting the control of DCE by DTE while m is used for
setting the control of DTE by DCE. When m is omitted, the same
input value as DCE by DTE is used.
Does not perform flow control.
Performs XON/XOFF flow control.
Performs RS/CS (RTS/CTS) flow control (Default).
Does not perform flow control.
Performs XON/XOFF flow control.
Performs RS/CS (RTS/CTS) flow control (Default).
Sets the radio network used by the FOMA terminal when originating
communication.
FOMA network (fixed value)
Displays the command setting and S register data.
Selects whether an extended result code is used when the
connection is established.
Does not use an extended result code (Default, when the parameter
is omitted).
Uses an extended result code.
Performs the receiving operation according to the mode received
by the FOMA terminal.
Originates packet or 64K data communication.
For packet communication: Enter the command in the "ATD 99
cid#" format. When cid is omitted, cid=1 is set. If the command
is entered in the format beginning with "ATD184 99", then 184
(without caller ID) is added to an APN of the specified cid. (This
condition also applies to 186.)
For 64K data communication: Enter the command in the "ATD
phone number" format.
For originating a call by redial: Enter the command in the "ATDL" or
"ATDN" format.
Sets whether characters sent from the PC are echoed back.
Does not echo back (When the parameter is omitted).
Performs an echo back (Default).
Disconnects packet or 64K data communication.
Displays an identification code.
Displays "NTT DoCoMo" (When the parameter is omitted).
Displays the name of the FOMA terminal.
Displays the version of the FOMA terminal.
Switches from the online command mode to the online data mode
during communication.
Sets whether the result code is displayed on the PC.
Displays (Default, when the parameter is omitted).
Does not display.
Sets the number of rings sounded until the FOMA terminal
automatically receives a call.
Does not automatically receive a call (Default, when the parameter
is omitted).
Number of rings
26
Input example
AT+CREG=1
AT+CREG?
AT+CREG=?
AT+GMI
AT+GMI=?
AT+GMM
AT+GMM=?
AT+GMR
AT+GMR=?
AT+IFC=2,2
AT+IFC?
AT+IFC=?
AT+WS46=22
AT+WS46?
AT+WS46=?
AT¥S
AT¥V0
ATD 99
3#
ATE0
ATH
ATI0
ATO
ATQ1
ATS0=0
ATS0?
Advertisement
Chapters
Table of Contents
