Table of Contents
Advertisement
1 To place a call, Number A is the default setting
for the Phonebook of the A/Common setting, and
Number B is the one for the Phonebook of the B
setting.
2 When the phone number of placing/receiving
a call or sending/receiving SMS and mail
address of receiving/sending mail are saved
in the Phonebook, after comparing them with
the phonebook data, the name saved in the
Phonebook of each phone number and mail
address is displayed.
3 When you save the phonebook entries or mail from
the microSD card to the FOMA terminal, you can
save them based on each file in the microSD card.
4 When the sender's mobile phone is not compatible
with the 2in1 functions, Number A is applied.
5 When you compose new mail in the Dual mode,
you can select a mail address from the Phonebook
of the B mode setting but note that mail is sent
from Address A.
6 Except i- ppli with mail, i- ppli using mail, and
i- ppli stand-by display.
7 Except i- ppli stand-by display.
Using OFFICEED
"OFFICEED" is a fixed-rate service within
a group provided by IMCS (Indoor Mobile
Communication System). You may need to
apply separately to use this service.
For more information (provided only in Japanese),
see the DoCoMo's website for business customers
(http://www.docomo.biz/d/212/).
420
Saving a New Service to
Use It
When DoCoMo adds a new network service,
you can save the service in the Menu and use
it.
1
From the Menu, select [Settings]
[ M a n a g e m e n t ]
[Additional service] and press
2
Set each item.
Menu item
Register USSD
<OFFICEED>
Register ans
word
<Additional service (USSD) registration>
[ N W S e r v i c e s ]
Operation
[Register USSD]
(Edit)
Enter a name of the
service at [Service] (within 10 full-
width or 20 half-width characters)
Enter a USSD command at [USSD]
(within 20 digits)
To use a service
Select [Register USSD]
service.
To delete a service
[Register USSD]
cursor to a service and press
(Func)
Select [Delete one] (to
delete all services, select [Delete
all]
enter the Security code)
Select [Yes].
[ R e g i s t e r a n s w o r d ]
[Unregistered]
an answering message at [Answer
wording] (within 10 full-width or 20
half-width characters)
USSD command at [USSD] (within
20 digits)
(Complete).
To delete an answering message
[Register ans word]
t h e c u r s o r t o a n a n sw e r i n g
message and press
Select [Delete one] (to delete
all answering messages, select
[Delete all]
enter the Security
code)
Select [Yes].
.
[Unregistered]
(Complete).
a
Move the
(Edit)
Enter
Enter a
Move
(Func)
Advertisement
Chapters
Table of Contents
