NTT docomo FOMA SO703i Manual

Table of Contents

Quick Links

Download this manual

Manual for

Easy Search/Contents/

Safety Precautions

Before Using the

'07.2

FOMA Terminal

Voice/

Videophone Call

PushTalk

Phonebook

Sound/Display/

Light Settings

Security Settings

Camera

i-mode/i-motion/

i-Channel

Mail

i-αppli

Osaifu-Keitai/

ToruCa

Displaying/Editing/

Managing Data

Playing Music

Other Useful Functions

Network Services

Data Communication

Entering Text

Appendix/External Device Interface/

Troubleshooting

Index/

Quick Manual

Table of Contents

Chapters

Table of Contents

Need help?

Do you have a question about the FOMA SO703i and is the answer not in the manual?

Questions and answers

Summary of Contents for NTT docomo FOMA SO703i

Page 1 Manual for Easy Search/Contents/ Safety Precautions Before Using the ’07.2 FOMA Terminal Voice/ Videophone Call PushTalk Phonebook Sound/Display/ Light Settings Security Settings Camera i-mode/i-motion/ i-Channel Mail i-αppli Osaifu-Keitai/ ToruCa Displaying/Editing/ Managing Data Playing Music Other Useful Functions Network Services Data Communication Entering Text Appendix/External Device Interface/ Troubleshooting...
Page 2 NTT DoCoMo W-CDMA System Mobile Phone Thank you for your purchase of the new “FOMA SO703i” mobile phone. For proper and effective use of the FOMA SO703i, read this manual carefully before and while you use the FOMA SO703i. Before using the FOMA terminal ●...
Page 3: Information On Using The Manual And How To Look Up In The Manual
● Please note that “FOMA SO703i” is called the “FOMA terminal” in this “Manual for FOMA SO703i”. ● This manual describes the functions that can be performed using the microSD memory card. To use these functions, you need the optional microSD memory card.
Page 4: Table Of Contents
A function, referred to as “Notify caller ID” here, can be searched in diverse ways as follows. Index (P.310) Search by a function or service name known to you or a function name to be displayed on the FOMA terminal’s display........
Page 5: Additional Informa
■ Typical layout of the operating instructions page Function name The settings at the time of Notifying the Recipient of Your Phone Number Section title <Notify caller ID> purchase Default Not notify When placing a call, your phone number can be shown in the display of the recipient’s An outline and objectives of phone you are calling.
Page 6: Easy Search
Easy Search You can search a function that you want to know or you consider useful to know from a listing sorted by purpose or by a function name. Useful Functions for a Call your phone number Sending or keeping it anonymous ..Notify caller ID (P.41) Switching to videophone during a call ......Chg.
Page 7: Setting Communication Using The Foma Pc Setup Software
Useful Functions for Mail Deco-mail Sending ............Compose and send Deco-mail (P.171) image Sending an .............File attachment (P.174) Sorting automatically received mail ......Sort inbox/Sort outbox (P.182) Useful Functions for the Camera photo light Turning on the ..........Photo light (P.141) recording size Changing the ..........Select size (P.142) microSD memory card...
Page 8: Functions
Information on Using the Manual and How to Look up in the Manual ...1 Easy Search ..............4 Contents Main Functions of the FOMA SO703i .......8 Making Full Use of SO703i ! ...........10 Safety Precautions (Observe Strictly) ......12 Handling Precautions ............18 Intellectual Property Right ..........20...
Page 9: Functions
Mail What is i-mode mail?, Mail menu, Compose and send mail, Compose and send Deco-mail, Template, File attachment, Save mail, Receive option, Check new messages, Received/sent/saved mail, Mail setting, Compose and send SMS, and so on... i- α ppli What is i-αppli?, Download, Run i-αppli, Auto start, i-αppli stand-by, Manage i-αppli, and so on... Osaifu-Keitai/ToruCa What is Osaifu-Keitai?, Start an Osaifu-Keitai-compatible i-αppli, What is ToruCa?, Obtain a ToruCa card, Display ToruCa, Manage ToruCa cards, ToruCa setting, IC act.
Page 10: Main Functions Of The Foma So703I
Main Functions of the FOMA SO703i “FOMA” is the name of NTT DoCoMo’s mobile service based on the W-CDMA (Wideband Code Division Multiple Access) system, which has been approved as a global standard of third generation (3G) wireless communication systems (IMT-2000 or International Mobile Telecommunications-2000).
Page 11 Camera Function Style-Up Panel & AROMASHEET You can record still images and movies The Style-Up Panel is employed. Optional using two cameras, Out- and In-camera. This panels allow you to enjoy customizing the FOMA terminal has a wide range of installed look of your FOMA terminal by changing camera functions including a scene selection the panel according to your preference.
Page 12: Making Full Use Of So703I
Making Full Use of SO703i ! Videophone Chaku-moji You can have a face-to-face conversation When you place a voice or videophone call, with a person in the distance. You can also you can send a message that is displayed in send images of the scenery around you by the recipient’s Incoming call display in order switching the camera to the Out-camera, or...
Page 13 Osaifu-Keitai/ToruCa  Once you download the Osaifu-Keitai-compatible i-αppli, you can deposit e-money to IC card inserted in the FOMA terminal or look up Beep the balance or purchase history. Furthermore, the i-αppli for “DCMX” credit service provided by DoCoMo is preinstalled, making your mobile phone an increasingly handy tool in real life by providing a feature known as “Osaifu-Keitai”.
Page 14: Safety Precautions (Observe Strictly)
■ “Safety Precautions” are described in the following Safety Precautions (Observe categories: Strictly) Handling the FOMA Terminal, Battery Pack, Adapter (including the charger), and UIM ..12 Handling the FOMA Terminal ............ 14 For safe and proper use of the FOMA terminal, please Handling the Battery Pack............
Page 15 WARNING CAUTION Do not place the FOMA terminal, battery Do not place on an unstable or inclined pack, adapter (including the charger), platform. or UIM inside cooking appliance such Doing so may cause the device to fall Don’t Don’t as a microwave oven or high-pressure and cause injury or malfunction.
Page 16 Power off the FOMA terminal in a place Handling the FOMA Terminal where the use is prohibited such as in airplane or hospital. WARNING Failure to do so may affect electronic equipment and electronic medical Do not use the FOMA terminal while equipment.
Page 17 CAUTION The use of the FOMA ter minal may cause itching, rashes, eczema, or other symptoms depending on the user’s Do not swing the FOMA terminal around physical condition. Immediately stop using by holding the strap. and get medical treatment in such a case. The FOMA terminal may hit you or others Don’t Metals are used as listed below:...
Page 18: Move
DANGER Handling the Adapter (including the charger) If the battery fluid gets into your eyes, do not rub, rinse with clean running water, WARNING and get medical treatment immediately. Failure to do so may cause blindness. Do not use the adapter (including the charger) if the cord of the adapter or the WARNING power cord is damaged.
Page 19 CAUTION Use the adapter only on the specified power supply and voltage. Failure to do so may cause fire or Do not place any heavy objects on the malfunction. Always use the FOMA AC cord of the adapter (including the charger) Adapter for Global use 01 especially or the power cord.
Page 20: Handling Precautions
WARNING Handling Precautions Please observe the following guidelines in ◆ Common Precautions medical facilities. ● Do not expose to water.  Do not take the FOMA terminal into the  The FOMA terminal, battery pack, adapter (including the operating rooms, ICU (Intensive Care charger), and UIM are not waterproof.
Page 21 ● Do not sit down with the FOMA terminal in the hip ● The adapter (including the charger) could become pocket of your trousers or skirt. Also, do not keep the warm while charging. This condition is not abnormal FOMA terminal in a place where it may be subject to and you can continue charging the battery.
Page 22: Intellectual Property Right
 Mascot Capsule ® ◆ FeliCa Reader/Writer is a trademark of the HI Corporation.  NetFront of ACCESS CO., LTD is installed in this product to ● The FeliCa reader/writer function of the FOMA provide Internet functionality. terminal uses extremely weak radio waves, so that NetFront is a trademark or registered trademark of ACCESS CO., LTD.
Page 23 ◆ Others  This product contains Flash ® Lite™ of Adobe Systems Incorporated. Adobe, Flash, Flash Lite, and Macromedia are trademarks or registered trademarks of Adobe Systems Incorporated in the U.S. and other countries. Copyright © 1995-2007 Adobe Systems Incorporated. All rights reserved.
Page 24: Supplied And Optional Accessories
Supplied and Optional Accessories ■ Supplied accessories Manual for FOMA SO703i FOMA SO703i CD-ROM FOMA SO703i (this manual) (w/warranty, back cover SO05, and (“Manual for Data Communication” Style-Up Panel SO01) (w/Quick Manual P.316) (PDF format) and “Kuten Code List” (PDF format) are included)
Page 25 Before Using the FOMA Terminal Part Names and Functions ....................24 Using the Displays ....................... 26 About the Sub-display ......................29 Selecting the Menu ......................30 Using the UIM ........................32 Attaching and Removing the Battery Pack ................34 Charging the FOMA Terminal ....................35 Attaching and Removing the Style-Up Panel ...............
Page 26: Part Names And Functions
Part Names and Functions                                     ...
Page 27  Earpiece  Style-Up Panel The caller’s voice is heard from here. Make sure to use the FOMA terminal with the panel attached  Main Display (P.37). (P.26)  Illumination Indicator/Auto Timer Indicator/FeliCa Sign  Mail Key Flashes when receiving a call/mail (P.110). In the stand-by display, press to display the Mail menu (P.170) Lights during the Camera mode.
Page 28: Before Using The Foma Terminal
Four-way Keys and Enter Key Symbols in Operation Description this manual Enter key Set a selected item. Move the cursor upward. Press for over a Left Right Up arrow second to move the cursor continuously. arrow arrow arrow Press in the stand-by display to display the Data Box.
Page 29   Radio wave condition / / / (Strong  Weak) Battery level (P.38)   During i-mode (P.152) The vibrator is set for incoming calls (P.101) During i-mode communication The vibrator is set for incoming mail (P.101) During packet communication The vibrator is set for incoming calls and mail While sending/receiving packet communication (P.101)
Page 30: Notification Display
Notification Display An icon is displayed in the notification display to alert you, for example, when you cannot answer a call. The icon is displayed from the left in the order of the latest event. Move the cursor to the icon to display the text information and select the icon to check the notification information.
Page 31: About The Sub-Display
Guide Display To utilize the FOMA terminal’s functions, use the four-way keys (Up/Down/Left/Right arrow keys), the enter key, the Mail key, the i-mode/i-αppli key, the MENU key, and the i-Channel/My Selection key according to the instructions shown in the guide display. Display Operation Display...
Page 32: Selecting The Menu
Selecting the Menu Default Menu guide display (Normal mode): OFF, Menu guide display (Simple mode): ON The FOMA terminal provides various functions. Press (MENU) to display the menu display. You can switch the menu display between [Normal] and [Simple] as well as change menu icons to be displayed in the Normal mode.
Page 33 Selecting a Function from the Menu Display A function can be executed easily by going through the menus. Press (MENU). The menu display appears. to select a menu and press The function associated to the menu is selected. ● You can execute a function in the menu display by pressing a key on the keypad. For the functions that can be executed using a number key, see the list of menus (P.270).
Page 34: Using The Uim
Using the UIM The UIM (FOMA card) records user information such as your phone number. Insert a UIM in the FOMA terminal to use it. Inserting/Removing the UIM When inserting/removing the UIM (FOMA card), make sure to power off and fold the FOMA terminal, remove the battery pack, and perform the operation with the FOMA terminal held with your hand.
Page 35 About the Function for Restricting UIM Operation The FOMA terminal provides a function for restricting UIM (FOMA card) operation in order to protect your data and files. If you record a videophone message or download files or data from sites or mail while the UIM is inserted in the FOMA terminal, the UIM operation restriction function is automatically set for these data and files.
Page 36: Attaching And Removing The Battery Pack
WORLD WING WORLD WING is the DoCoMo’s FOMA international roaming service that enables you to place or receive a call using the same mobile phone number even if you are overseas, just by replacing the UIM (green/white) with a card for a WORLD WING service-compatible FOMA terminal or overseas-use mobile phone (W-CDMA or GSM system).
Page 37: Charging The Foma Terminal
Return all spent battery packs to NTT DoCoMo or a dealer, or a recycling shop to protect the environment.
Page 38 How to Charge the FOMA Terminal Charge the battery pack using the optional Desktop Holder SO05 with the FOMA AC Adapter 01 connected. Make sure to see the user’s manuals of the Desktop Holder and AC Adapter. The battery pack cannot be charged alone. Insert the connector of the AC adapter horizontally I n s e r t t h e c o n n e c t o r with the engraved side facing up into the terminal...
Page 39: Attaching And Removing The Style-Up Panel
Attaching and Removing the Style-Up Panel The Style-Up Panel is a name for a set of panels with which you can dress up the front face of your FOMA terminal. You can change the supplied Style-Up Panel SO01 with an optional Style-Up Panel SO01.
Page 40: Checking The Battery Level
■Precautions on use  The perception of aroma may differ in individuals.  Do not use the AROMASHEET for other than the specified use such as sticking it to skin.  Do not use aromatic or perfume on hand instead of the AROMASHEET or accrete it on the AROMASHEET. Doing so may cause malfunction of the FOMA terminal.
Page 41: Battery Level> 38
Checking the Battery Level with the Sound and Display  The confirmation beep does not sound when the volume of the keypad sound is [OFF] (P.102). From the Menu, select [Settings] → [Management] → [Battery level] and press The current battery level is displayed using bars in the display and the confirmation beep sounds according to the remaining battery level.

Page 42: Setting The Date And Time
From the Menu, select [Settings] → [Management] → [Init. setting] and press ＩｎｉｔｉａｌｓｅｔｔｉｎｇＤａｔｅ／ｔｉｍｅＣｈａｎｇｅｃｏｄｅＹｅｔＫｅｙｐａｄｓｏｕｎｄ１ＦｏｎｔｓｉｚｅＰｕｓｈＴａｌｋｃａｌｌｅｒＩＤＯＦＦ Set each item. ● If you perform the Reset all data&set or do not change the Security code of the FOMA terminal, the message “Initial setting is incomplete.
Page 43: Notify Caller Id
Notifying the Recipient of Your Phone Number <Notify caller ID> Default Not notify When placing a call, your phone number can be shown in the display of the recipient’s phone you are calling.  The caller ID is important personal information. Carefully decide whether you notify a recipient of your caller ID. From the Menu, select [NW Services] →...
Page 44 Press (Edit) in the Own number display. Ｅｄｉｔｍｙｄａｔａ０９０ＸＸＸＸＸＸＸＸ Save each item. Icon Settings Enter your mail address within 50 half-width alphanumeric characters and symbols. Enter your name within 16 full-width or 32 half-width characters. When entering your name, the reading is automatically entered. ...
Page 45 Voice/Videophone Call ■ Placing Voice/Videophone Calls What is Videophone? ......................44 Placing a Voice/Videophone Call ..................45 Switching to/from Voice/Videophone Call ...... <Chg. to videophone/Chg. to voice call> Using the Redial/Received Record ......... <Redial record/Received record> Setting the Chaku-moji ..................<Chaku-moji>...
Page 46 What is Videophone? You can use the videophone function between DoCoMo videophone compatible terminals. You can use videophone to talk to the recipient/caller while looking at each other’s image. You can send a still image, substitute image, or Chara-den character instead of your own.
Page 47 Placing a Voice/Videophone Call Check the radio wave condition and enter a phone number.  Do not cover the antenna with your hand for a call in better radio wave condition. Example: Placing a voice call Enter a phone number in the stand-by display. ...
Page 48 ● See P.52 for sending the Chaku-moji and P.53 for placing a voice or videophone call by specifying the condition. ● For a voice call, you can also place it in the order of step 2 → step 1. Press and enter a phone number, and the call is dialed automatically after about five seconds.
Page 49 Using the Hands-free Function When you switch to the hands-free operation during a call, you can hear the caller’s voice from the speaker and talk hands-free. Example: Switching to the hands-free operation during a voice call Press ( ) during a call. The call is switched to the hands-free operation and “...
Page 50 Entering a “+” If you enter “+” at the beginning of a phone number when the Auto conversion of the Int’l dial assist setting is set to [ON], a call is dialed by automatically adding the set international access number (set to “009130010” at the time of purchase). Press for over a second in the phone number input display.
Page 51 Using the Redial/Received Record <Redial record/Received record> Up to 30 previously placed/received calls are saved as call records with their dates/ times, phone numbers, and names. The phone numbers or names appear in descending order from the most recent call. For a PushTalk call, the group name or the first member’s name appears.
Page 52 To send mail You can send mail to a person whose phone number and mail address are saved in the Phonebook. Move the cursor to a call record and from the Function menu, select [Reply by mail] → a mail address. Compose mail and send it. To save in a group of the PushTalk phonebook When you perform PushTalk communication among several persons saved in the PushTalk phonebook, move the cursor to a received record of the PushTalk call (...
Page 53 Deleting the Redial/Received Record The call records are retained even if the FOMA terminal is powered off. If you do not wish others to know the previously dialed records, delete one or all of the call records.  If you delete either a redial record or a dial frequency record, both records are deleted. Example: Deleting a call record From the call record display, select a call record and press (Func).
Page 54 Setting the Display for Chaku-moji Being Received Default Only calls w/ID You can set the display style to be used when you receive a Chaku-moji message. From the Menu, select [NW Services] → [Chaku-moji] → [Set Message display] and press [Display all Msgs] : Receive and display all Chaku-moji.
Page 55 ● When a Chaku-moji is received by the recipient, “ ” appears in the sender’s terminal display and charge is required. ● If the recipient does not receive the Chaku-moji, “ ” appears. In this case, there is no charge. (For example, when the recipient’s terminal does not have Chaku-moji support or if the Chaku-moji was received in a condition other than that set using the Set Message display menu.) ●...
Page 56 Select [Voice call] and press The menu for selecting a Chaku-moji message appears.  For details about how to place a call together with a Chaku-moji message, see P.52. Select [No message] and press [Call] : The voice and videophone calls follow the setting of the Set Notification.
Page 57  If you have an overseas specific 3G mobile phone, you can connect to an international videophone by selecting videophone after the above dialing method. ※ See the NTT DoCoMo’s website for information about countries to which a videophone call can be connected and telecommunication companies.
Page 58 Select [ON]/[OFF] at [Auto conversion]. [ON] : Automatically add the additional number you set for the Int’l prefix. [OFF] : Do not automatically add the additional number. Select [Int’l prefix] and press The Int’l prefix setting display appears. Select an input field and press Ｉｎｔ’ｌｃａｌｌ１...
Page 59 Placing a Call by Specifying a Sub-address <Sub-address> Default You can set to place a call to a specific phone or communication device by specifying a sub-address.  The sub-address is also used when you select a content in V-Live. From the Menu, select [Settings] →...
Page 60 Improving Voice Clarity by Suppressing Background Noise <Reduce noise> Default You can suppress background noise during a voice or videophone call or during playing back an answering message set for the record message. From the Menu, select [Settings] → [Call] → [Call quality] → [Reduce noise] and press Select [ON]/[OFF] and press The Reduce noise is set.
Page 61 Example: Receiving a voice call When receiving a call, press A phone number appears in the display when a caller sends it. Ｉｎｃｏｍｉｎｇｃａｌｌ When you receive a videophone call Your image is sent to the caller and the call is switched to the hands- Ｕｒｇｅｎｔ...
Page 62 Receiving a Call by Switching to/from Voice/Videophone Call A caller can switch between voice and videophone calls during a call. When the caller switches the voice call to the videophone call, a recipient can select whether to send a camera image. ...
Page 63 Setting the Operation for the FOMA Terminal Being Folded during a Call <Setting when folded> Default Voice call/V.phone: Disconnect, PushTalk: Speaker call You can end a call or put a call on hold by just folding the FOMA terminal during a voice or videophone call.
Page 64: Putting A Call On Hold
Putting a Call on Hold during a Call <Holding> The call can be put on hold during a voice or videophone call so that your voice cannot be heard by the recipient.  Even if the call is put on hold, the caller is charged for the call. Press (Func) during a call, select [Holding], and press Both you and the recipient hear the melody “Hamabe no uta”.
Page 65 Press ) for over a second in the stand-by display. The screen for confirming whether to set the Public mode (Driving mode) appears. Press (OK). The Public mode is set and “ ” appears.  When the Manner mode and the Public mode are set simultaneously, the Public mode has priority.
Page 66 Using the Public Mode (Power off) <Public mode (Power off)> The Public mode (Power off) is an automated answering service which takes into account the manners in highly public places. When the Public mode (Power off) is set, the guidance is played back to inform the caller that you are unable to answer the call because you are in a place where it is required to power off a mobile phone (such as in hospitals, airplanes, and near priority seats in trains), provided that there is an incoming call when the FOMA terminal is powered off, and then the call is disconnected.
Page 67 Checking the Missed Calls <Missed call> When you are unable to answer an incoming call or receive new mail, the notification icon (P.28) appears in the stand-by display. If a voice, videophone, or PushTalk call or 64K data communication is not answered, “...
Page 68 When Receiving a Call The answering message is played back to the caller after the ring tone Ｐｌａｙａｎｓｗｅｒｍｅｓｓａｇｅドコモ一郎 sounds for the set duration. To talk to the caller Press When you receive a videophone call The answering message is played back and the answering image is displayed to the caller.
Page 69 Select an image to be sent when recording the caller’s image from My picture of the Data Box at [Record img(V.phone)].  You can set the following files. Category File format File size Image size My picture GIF/JPEG Max. 500K bytes Max.
Page 70 Playing Back/Deleting a Record Message/Videophone Message/Voice Memo You can play back or delete a recorded record message/videophone message and voice memo (P.247). Playing Back a Record Message/Videophone Message/Voice Memo Example: Playing back a record message Press in the stand-by display, select [Play rec msg], and press To play back a videophone message Ｐｌａｙｒｅｃｏｒｄｍｅｓｓａｇｅ...
Page 71 Using Chara-den When you place a videophone call, you can send a character instead of a camera image. You can press keys on the keypad to move a character or some character’s mouth to correspond to the voice on the microphone. ...
Page 72 Setting the Videophone Operation <Videophone setting> Setting the Display to Be Used in a Videophone Call Default Main-Other side You can set the image to be displayed on the videophone images (Large) and (Small) during a videophone call. From the Menu, select [Settings] → [Call] → [Videophone] → [Display setting] and press [Main-Other side] : Display the recipient’s/caller’s image on the videophone image (Large) and your image on the videophone image (Small).
Page 73 Setting the Videophone Image Quality Default Normal You can set the quality of an image to be sent to the recipient. From the Menu, select [Settings] → [Call] → [Videophone] → [Visual preference] and press [Prefer img qual] : Send an image with priority on image quality. [Normal] : Send an image by keeping a balance between image quality and movement.
Page 74 Setting How to Answer a Videophone Call during i-mode Default Prefer V.phone You can set how to answer a videophone call received during i-mode or packet communication, for example, sending or receiving mail. From the Menu, select [Settings] → [Call] → [Videophone] → [V.ph while packet] and press [Prefer V.phone] : Receive a videophone call.
Page 75 PushTalk What is PushTalk? ........................ 74 Originating a PushTalk Call ....................76 Adding a Member during PushTalk Communication ............77 Receiving a PushTalk Call ....................77 Saving Data in the PushTalk Phonebook ................78 Originating a PushTalk Call Using the PushTalk Phonebook ..........80 Deleting a PushTalk Phonebook Entry .................
Page 76: What Is Pushtalk
What is PushTalk? You can communicate among several persons (up to five persons including yourself) with a simple operation of pressing to display the PushTalk phonebook, selecting recipients, and pressing . Every time you press (speak), you are charged for PushTalk communication.
Page 77 Using the Display during PushTalk Communication  Main display : During PushTalk communication   : Hands-free ON  Active speaker The phone number (or the member name when the speaker is saved in  ＯｎＰｕｓｈＴａｌｋ the Phonebook) appears  ドコモ一郎...
Page 78: Originating A Pushtalk Call
Originating a PushTalk Call  You cannot originate a PushTalk call during a voice call, a videophone call, or data communication.  If you originate a PushTalk call during i-mode communication, the i-mode communication is terminated. Originating a PushTalk call while running i-αppli also stops the i-αppli. Enter a phone number in the stand-by display.
Page 79: Adding A Member During Pushtalk Communication
Adding a Member during PushTalk Communication If you originate a PushTalk call, you can add a member during PushTalk communication. Example: Selecting a member from the PushTalk phonebook Press (Add) during PushTalk communication. The screen for selecting the method of adding a member appears. [View PushTalk PB] : Select a member from the PushTalk phonebook.
Page 80: Saving Data In The Pushtalk Phonebook
When you receive a PushTalk call, press When the call is answered, it is switched to the hands-free operation ＰｕｓｈＴａｌｋＧｒｃａｌｌドコモ一郎 that allows you to hear the recipient’s voice from the speaker. When you do not want to answer the call ドコモ三郎...
Page 81 Select an entry → a phone number and press The phone number is saved in the PushTalk phonebook and “ ” ＳｅｌｅｃｔＰｕｓｈＴａｌｋＮｏ． appears in the entry in the FOMA terminal phonebook. ０９０ＸＸＸＸＸＸＸＸ０３ＸＸＸＸＸＸＸＸ ● When you save a person saved as Secret in the FOMA terminal phonebook in the PushTalk phonebook, the entry is not displayed in the PushTalk phonebook.
Page 82: Originating A Pushtalk Call Using The Pushtalk Phonebook
Originating a PushTalk Call Using the PushTalk Phonebook If you save persons as members in the PushTalk phonebook, you can originate a PushTalk call to several persons. Press in the stand-by display, select a member, and press “ ” appears for the selected member. Ｍｅｍｂｅｒ...
Page 83: Deleting A Pushtalk Phonebook Entry
Select a group and press When a PushTalk call is originated, the signal tone sounds. ＤｉａｌｉｎｇＰＴｇｒｏｕｐ ○○○同好会 To originate a call to specific members by selecting them from a group 携帯あき子 Select a group → members and press 携帯はる子ドコモ一郎ドコモ二郎...
Page 84: Using The Pushtalk Phonebook
Using the PushTalk Phonebook <PushTalkPlus> You can connect to the network and use the PushTalkPlus service (P.74).  To use the PushTalkPlus service, you must subscribe to this service. Press in the stand-by display and press (Func). The Function menu appears. Select [NW connection] →...
Page 85 Sending Your Own and Member’s Caller IDs Default When originating a PushTalk call or adding a new member during PushTalk communication, your own and all member’s phone numbers can be shown in the recipient’s display.  A phone number is an important personal information. Carefully decide whether you want to notify members of your and member’s caller ID.
Page 86 Setting Whether to Receive a PushTalk Call during i-mode Default Prefer PushTalk You can set whether to receive a PushTalk call by disconnecting i-mode if there is any incoming PushTalk call during i-mode or i-mode communication. From the Menu, select [Settings] → [Application] → [PushTalk] → [i-mode arrival act] and press [Prefer PushTalk] : Receive the PushTalk call and disconnect i-mode.
Page 87 Phonebook Phonebooks the FOMA Terminal Can Use ................86 <Add to FOMA terminal phonebook> Saving an Entry in the FOMA Terminal Phonebook ..<Add to UIM phonebook> Saving an Entry in the UIM Phonebook ........... Saving the Redial/Received Record in the Phonebook ............90 Saving a Group .....................
Page 88 Phonebooks the FOMA Terminal Can Use The FOMA terminal is equipped with two types of phonebooks, the FOMA terminal phonebook, which you can set up with various functions, and the UIM (FOMA card) phonebook, which can be used with other FOMA terminals. Use either phonebook to your convenience. ...
Page 89 Saving an Entry in the FOMA Terminal Phonebook <Add to FOMA terminal phonebook> Up to 1,000 entries can be saved in the FOMA terminal phonebook. Press ) in the stand-by display and press (Create). Select [Main memory] and press To save an entry in the UIM phonebook Ｅｄｉｔｐｈｏｎｅｂｏｏｋ...
Page 90 Icon Settings Select an image from My Picture/i-motion of the Data Box or record a new one to be used as the Des call display that is displayed when placing/receiving a voice or videophone call or displaying the individual Phonebook entry. ...
Page 91 Saving an Entry in the UIM Phonebook <Add to UIM phonebook> Up to 50 entries can be saved in the UIM (FOMA card) phonebook. Press ) in the stand-by display and press (Create). Select [UIM] and press To save an entry in the FOMA terminal phonebook Ｅｄｉｔｐｈｏｎｅｂｏｏｋ...
Page 92 Saving the Redial/Received Record in the Phonebook A phone number saved in the record can be directly added to the Phonebook. Example: Saving a received record in the FOMA terminal phonebook as a new entry Press ) in the stand-by display. To save a number from the redial record Press ) in the stand-by display.
Page 93 Saving a Group <Group setting> Up to 20 groups can be saved in the FOMA terminal phonebook, and up to 10 groups can be saved in the UIM (FOMA card) phonebook.  You cannot change [ No Group] in the UIM phonebook. Example: Saving a group in the FOMA terminal phonebook Press (Func) in the Phonebook.
Page 94 Displaying the Phonebook You can use the Phonebook to perform various operations. Example: Displaying the FOMA terminal phonebook Press ) in the stand-by display. To display the UIM phonebook あかさたなはまやドコモ一郎 Press (UIM). Every time you press the key, the display switches ドコモ三郎...
Page 95: Searching The Phonebook
Searching the Phonebook <Search phonebook> The Phonebook can be searched to display up to 100 entries temporarily. Press (Func) in the Phonebook. The Function menu appears. Select [Search] and press [Name] : Enter part of a reading within 32 half-width characters. For the UIM Ｓｅａｒｃｈｐｈｏｎｅｂｏｏｋ...
Page 96: Editing A Phonebook Entry
Editing a Phonebook Entry <Edit phonebook> From the Phonebook, select an entry and press Press (Edit). The Edit phonebook display appears. Edit each item.  Follow the same steps as in “Add to FOMA terminal phonebook” (P.87, step 3) or in “Add to UIM phonebook”...
Page 97 Storing (Restoring/Updating) the Phonebook at the Data Security Service Center You can use the Data Security Service to store the FOMA terminal phonebook at the Data Security Service Center.  For details about updating the Phonebook, see P.97. Press (Func) in the Phonebook. The Function menu appears.
Page 98 Checking the Number of Entries Saved <Memory status> You can check the number of entries saved in the FOMA terminal phonebook and UIM (FOMA card) phonebook and the number of locations still available or entries saved as Secret. Press (Func) in the Phonebook. The Function menu appears.
Page 99 Using the Data Security Service <Data Security Service> You can use the Data Security Service to store the FOMA terminal phonebook at the Data Security Service Center. You can update or restore the stored Phonebook by connecting to the Data Security Service Center. ...
Page 100 Displaying the Communication History You can save up to 30 history records of communication with the Data Security Service Center.  When the number of communication history records exceeds 30, the records with the oldest date/time are overwritten, in that order. From the Menu, select [LifeKit] →...
Page 101 Sound/Display/ Light Settings Setting the Ring Tone/Image/Indicator Color for Incoming Call and Mail ..<Incoming set> ■ Setting the Ringer Setting the Sounds of the FOMA Terminal ..........<Set basic tone> Adjusting the Volume of Caller’s Voice ..............<Volume> Adjusting the Volume While Playing Flash Movie .......... <Sound effect>...
Page 102: Setting The Ring Tone/Image/Indicator Color For Incoming Call And Mail
Setting the Ring Tone/Image/Indicator Color for Incoming Call and Mail <Incoming set> Default Ring tone: 着信音1, Link incoming call: OFF (Videophone), Link receive mail: ON (MessageR・MessageF), Ring volume: 3, Incoming image/Receiving img: 音声発着信中(voice call)/テレビ電話発着信中(videophone call)/ パケット通信(mail・MessageR・MessageF), Vibrator: OFF, Color: C9:Color9, Ring time: 4 sec (mail・MessageR・MessageF) You can set a ring tone, ring volume, incoming image, vibration pattern, and incoming indicator color for each type of incoming transmission (voice, videophone, or PushTalk...
Page 103 Set the volume of the ring tone at [Ring volume]. Select from [OFF] and [1 to 5].  For an incoming voice, videophone, or PushTalk call, you can set [Step down] and [Step up]. [Step down] turns down the volume every six seconds and [Step up] turns up the volume every six seconds. To set the ring tone volume to [OFF] Press at level 1.
Page 104: Setting The Sounds Of The Foma Terminal
■ Preinstalled melodies ■ Preinstalled music Title Title Title Title 着信音1∼4 ※ ※ After The Rain Insects’ Chorus Atmosphere 着信音5 ※ Fairy Tale ※ Shizuku ※ Afternoon Nap ※ Clear Sky ※ Ice Cube Salut d’amour ※ Polka Dot ※ Pilsner Okinawan ※...
Page 105: Adjusting The Volume Of Caller's Voice
Adjusting the Volume of Caller’s Voice <Volume> Default The volume of caller’s voice during a voice, videophone, or PushTalk call can be adjusted in five levels from level 1 (smallest) to level 5 (largest). From the Menu, select [Settings] → [Call] → [Call setting] → [Volume] and press The Volume display appears.
Page 106: Setting The Poor Signal Quality Alert
Setting the Poor Signal Quality Alert <Quality alarm> Default You can set to inform you with alarm of the possibility of the call being disconnected during a voice call due to the radio wave condition. From the Menu, select [Settings] → [Call] → [Call quality] → [Quality alarm] and press [High] : Sound a high alarm tone.
Page 107: Muting The Ring Tone
Muting the Ring Tone <Manner mode> All sounds from the FOMA terminal can be disabled to avoid disturbing others by using the Manner mode. There are three types of the Manner mode. Set the mode by using the Manner mode setting (P.106).
Page 108: Changing The Manner Mode Settings
Changing the Manner Mode Settings <Manner mode setting> Default Set: OFF, Mode: Manner The Manner mode can be selected from three types: “Manner”, “Silent”, and “Original manner”. Press in the stand-by display. ＭａｎｎｅｒｍｏｄｅＳｅｔＯＦＦＭｏｄｅＭａｎｎｅｒＯｒｉｇｉｎａｌｍａｎｎｅｒ Select the type of the Manner mode at [Mode]. Press (Complete).
Page 109: Setting The Stand-By Display
Setting the Stand-by Display <Stand-by display> Default Stand-by: Pattern, Ticker: Std Type: LTC/Clock, Font color: Blk, Clock style: 12h, Soft key: ON You can set the image for the stand-by display, the Telop display for i-Channel, Calendar/ Clock display, and whether to show or hide the guide display. From the Menu, select [Settings] →...
Page 110: Setting Images For Placing A Call/Sending Mail
Press (Type) to select a position/contents to be displayed and press (OK). Every time you press (Type), the position/contents of the calendar/clock changes. Select the font color of the calendar and clock at [Font color].  You cannot change the font color of Saturdays and holidays in the calendar and Lifetime Calendar. Select the display format of the clock at [Clock style].
Page 111: Name
Select an image from My picture of the Data Box at [Calling].  You can set the following files. Calling/V.phone calling img Category File format File size Image size My picture GIF/JPEG Max. 500K bytes Max. [VGA(640×480)] Flash Max. 100K bytes −...
Page 112: Setting The Display For The Sub-Display
Setting the Display for the Sub-display <Sub display> Default Ticker: Std, Power saver: 15 sec You can set the i-Channel Telop text to be displayed in the sub-display. The time before starting the Power saver can be also set for the sub-display. From the Menu, select [Settings] →...
Page 113: Saving Power For The Display
Select [Backlight always on] and press [Charging] : Set whether to keep the light on during charging. ＢａｃｋｌｉｇｈｔａｌｗａｙｓｏｎＣｈａｒｇｉｎｇＯＦＦ [Videophone] : Set whether to keep the light on during a videophone call. ＶｉｄｅｏｐｈｏｎｅＯＮ [Internet] : Set whether to keep the light on while displaying sites or Internet ＩｎｔｅｒｎｅｔＯＦＦ...
Page 114: Changing The Appearance Of The Menu
Changing the Appearance of the Menu <Menu setting> Default Menu mode: Normal, Icon setting: Pattern You can switch the menu display modes, and also set images to customize nine icons displayed in the Normal mode menu. Example: Setting an image as the icon for i-mode From the Menu, select [Settings] →...
Page 115: Informing Missed Call/New Mail With Indicator
Select [Preinstall] and press To set a menu pattern downloaded from the site Ｐｒｅｉｎｓｔａｌｌ２／４ Select the [Download] folder. ＲｏｍａｎｔｉｃＧｏｌｄＡｑｕａＷｈｉｔｅ To check the design of the stand-by or menu display ＭｉｓｔｙＢｌａｃｋ Move the cursor to the menu pattern and press (Play).
Page 116: Setting The Font Size
Setting the Font Size <Font size> Default Phonebook・Call record: Large, Mail・Internet: Medium You can set the size of fonts to be used individually for displaying the Phonebook, Call record, mail/SMS, and sites. Example: Setting the font size of the Phonebook From the Menu, select [Settings] →...
Page 117 Security Settings ■ About Security Codes Security Codes Used on the FOMA Terminal ..............116 Changing the Security Code ............... <Change code> Setting the PIN Code ..................<UIM setting> Canceling the PIN Lock ....................... 119 ■ Restricting Operations and Functions Available on the Mobile Phone Various Locking Functions ....................
Page 118: Network Security Code
Security Codes Used on the FOMA Terminal Some functions provided for convenient use of the FOMA terminal require the security code to use them. Besides the Security code for operating the mobile phone, the network security code necessary for the network services, i-mode password, etc. are available.
Page 119: Puk Code
i-mode Password The 4-digit “i-mode password” is required when saving/deleting My Menu or setting i-mode mail, etc. (There may be other passwords for the i-mode used by IP (information service providers).) The i-mode password is set to “0000” at the time of subscription. It can be changed by yourself.
Page 120: Changing The Security Code
Changing the Security Code <Change code> Default 0000 From the Menu, select [Settings] → [Management] → [Change code] and press Ｉｎｐｕｔｓｅｃｕｒｉｔｙｃｏｄｅ Enter the current Security code and press (OK). The entered Security code is displayed as asterisks ( ). Enter the new Security code and press (OK).
Page 121 Changing the PIN1 Code/PIN2 Code Default Change PIN1 code・Change PIN2 code: 0000  To change the PIN1 code, set the PIN1 code setting to [ON]. Example: Changing the PIN1 code From the Menu, select [Settings] → [Management] → [UIM setting] and press The Security code screen appears.
Page 122 Various Locking Functions The FOMA terminal offers many lock functions to assure safety operation, such as preventing unauthorized use of the FOMA terminal, protecting the Phonebook from being seen by others. You can use any mix of these functions depending on the purpose. Functions Description Lock all...
Page 123 ● To call emergency numbers (110, 119, and 118) when the Lock all is set, enter the emergency number and press . The emergency number is displayed as asterisks ( ) in the security code input field of the Security code screen. ●...
Page 124 ● Any other active function is terminated when the Omakase Lock is set. ● The Omakase Lock can be used even when another lock function is set. If you set the Omakase Lock while the Public mode (Driving mode) is set, you cannot receive a voice or videophone call. ●...
Page 125 Protecting Your Personal Data in the Phonebook, Schedule, etc. <PIM lock> Default You can disable the following functions to prevent others from viewing/editing your personal information such as the Phonebook and Schedule data. - MUSIC Player - LTC (Lifetime Calendar) - Camera - microSD - Mail...
Page 126 Restricting Dialing from the Keypad <Key dial lock> Default The keypad is locked to restrict placing a voice or videophone call or originating a PushTalk call. To cancel the Key dial lock temporarily, enter the Security code.  When you set the Key dial lock, you cannot perform the following functions. - Place a call using the keys on the keypad (excluding calls made by the 2-touch dial or using the Flat-plug Earphone/Microphone with Switch), place a call using the Received record, or [Call back] from i-mode mail - Add a member during PushTalk communication using the keys on the keypad...
Page 127 Displaying the Data Saved as Secret <Secret display> Default The Phonebook (PushTalk phonebook), Own number, and Schedule saved as Secret are not displayed unless the Secret display is set to [ON]. Make sure to save the Phonebook, Own number, and Schedule as Secret if you do not want others to see them. ...
Page 128 Specifying Phone Numbers to Accept/Reject Calls <Accept/Reject call> Default Set: OFF You can set to accept/reject voice, videophone, or PushTalk calls only from specific phone numbers. For the Accept/Reject calls, up to 20 phone numbers can be saved (Phone No.). You can also set to accept/reject calls only from specific groups in the FOMA terminal phonebook.
Page 129: Rejecting Calls With No Caller Id
Press (Complete). The Accept/Reject call from specified phone numbers is set. Rejecting Calls with No Caller ID <Denied no ID> Default When receiving a voice, videophone, or PushTalk call without the caller’s phone number displayed, the reason for not displaying it is shown. You can decide whether to accept a call based on the reason.
Page 130 Select [ON]/[OFF] at [Missed call display]. [ON] : Display all calls in the Received record. [OFF] : For a call the start time of which is shorter than the set time, neither the missed call notification icon nor the received record is displayed. The call is saved in the Received record. When the operation of the record message or videophone message is started, the notification icon of missed call appears and the received record is displayed.
Page 131 Even if you lose the stored data, for example, if you accidentally lost the FOMA terminal or it had a water-related trouble, you can restore the Phonebook and other stored data at the Center into a new FOMA terminal. Furthermore, you can easily edit the stored data at the Data Security Service Center by accessing the My DoCoMo website on your PC, and save the edited stored data in the FOMA terminal.
Page 133 Camera Before Using the Camera ....................132 Recording Still Images ................<Shoot by photo> Recording Movies ..................<Movie shoot> Changing the Camera Settings ..................140 Adjusting the Camera during Recording ................143 Setting the Camera Operation ................... 145 <Bar code reader> Using the Bar Code Reader ..............
Page 134: Before Using The Camera
Before Using the Camera You can record images by the FOMA terminal’s built-in camera, which you can send by attaching to i-mode mail and set for the stand-by display, etc. To use the microSD memory card, you need to obtain a microSD memory card separately.
Page 135 About Still Image/Movie Item Still image Movie File format JPEG (Exif format) MP4 (MobileMP4) File name When saved to [Data Box] When saved to [Data Box] YYYYMMDDhhmmss YYYYMMDDhhmmss  The recorded year, month, date, hour, minute,  The recorded year, month, date, hour, minute, second is displayed.
Page 136 About Recording Time of Movie The recording time of movie that can be saved in the Data Box or microSD memory card varies depending on the recorded image quality, Shoot mode, image size, file size restriction settings as well as the recording conditions and object of shooting. ■...
Page 137 Icons in the Camera Mode In the Camera mode display, the following icons appear depending on the settings and functions selected.  You can use (Display) to switch the display of the icons and guide display (Standard, Simple, or Display off). Even if you select “Display off”, related icons are displayed when you perform any operations.
Page 138: Recording Still Images
Recording Still Images <Shoot by photo> You can record still images using the camera. Press for over a second in the stand-by display. The Camera mode display appears. Point the camera at the object and press (Shoot). A still image is recorded with the shutter sound and the screen for confirming whether to save the image appears.
Page 139 Recording Images in Close to the Object You can record an object in close distance (about 8 cm). Slide the macro switch to the “ ” position in the Camera mode display. The Macro mode is set. To cancel the Macro mode Slide the macro switch to the opposite position of “...
Page 140 Recording Images with Frames You can record an image with a frame, which can be selected from the preinstalled frames or downloaded frames.  For Out-camera recording, you can select a frame size of [sQCIF(128×96)], [QCIF(176×144)], [QVGA(240× 320)], [Stand-by(240×432)], and [CIF(352×288)]. For In-camera recording, you can select the frame size of [sQCIF(128×96)], [QCIF(176×144)], and [CIF(352×288)].
Page 141: Recording Movies
Recording Movies <Movie shoot> You can make movie recordings with the built-in camera.  The movie recording time varies depending on where to save a movie (P.134). (Func) in the Camera mode display, select [Shoot] → [Switch mode] → Press [Movie shoot], and press The display switches to the Movie shoot display and “...
Page 142: Changing The Camera Settings
● When there is not enough memory or the number of recorded time of saved movies exceeds the maximum number, the message appears. Change the place to save the movie or delete unnecessary movies. Even if recording is possible, the maximum recording time may not be achieved. ●...
Page 143 Switching the Camera Used for Recording You can switch between the Out- and In-cameras for recording.  When the Shoot mode is set to [Continuous mode], you cannot switch the camera.  When the Shoot mode is set to [Shoot with frame] and the image size is set to [QVGA(240×320)] or [Stby(240× 432)], you cannot switch the camera from the Out-camera to In-camera.
Page 144 Using the Auto Timer The Auto timer allows you to record yourself or others without holding the FOMA terminal. You can also set the interval until recording is started after you press the shutter. (Func) in the Camera mode display, select [Shoot] → [Auto timer], and Press press The menu for selecting a time for the Auto timer appears.
Page 145: Adjusting The Camera During Recording
Adjusting the Camera during Recording Adjusting Brightness The image brightness (EV: Exposure Value) can be adjusted according to the ambient condition. The exposure can be adjusted in 13 levels from ‒2.0EV to +2.0EV for recording with the Out-camera and in seven levels from ‒1.0EV to +1.0EV for recording with the In-camera. (Func) in the Camera mode display, select [Adjust] →...
Page 146 Setting a Position for Automatic Adjustment of the Exposure You can set what position on the screen to use as a reference for the image brightness (EV) adjustment. Press (Func) in the Camera mode display, select [Adjust] → [Photometry], and press The menu for selecting a photometry mode appears.
Page 147: Setting The Camera Operation
Select a white balance type and press The White balance is set and the icon for the current white balance type appears.  No icon appears for [AUTO]. Bulb Fluorescent Fine Cloudy Restoring the Default Camera Settings You can reset the camera settings to the default settings. The camera settings listed below can be reset.
Page 148 Selecting the Shoot Mode of Movie Default Image+Sound You can select the shoot mode of movie from three types. Press (Func) in the Camera mode display, select [Shoot] → [Switch mode] → [Movie shoot], and press The display switches to the Movie shoot display. Press (Func), select [Set] →...
Page 149 Changing the Shutter Sound Default Shutter sound1 The shutter sound can be selected from three types when the Shoot mode for still images is [Regular] or [Shoot with frame].  The shutter sound volume is fixed and cannot be adjusted or muted. The shutter sound is heard even if the Manner mode is set.
Page 150 Setting Whether Recorded Images Are Automatically Saved Default You can set the save method of an image recorded. (Func) in the Camera mode display, select [Set] → [Auto save], and Press press The menu for selecting whether to automatically save the recorded images appears. [ON] : After recording, the image is automatically saved.
Page 151: Using The Bar Code Reader
 Up to 16 QR codes can be scanned serially so that they connect to each other and saved as a single data set. When scanning multiple segmented QR “Example: FOMA SO703i” codes, the message prompting you to scan the next QR code appears after you scan the first one.
Page 152 ● Some QR codes allow you to save data such as a name, phone number, and mail address all at once in the Phonebook just by scanning them. ● When scanned characters cannot be entered in the text editing display, they are replaced with as many spaces (blanks).
Page 153 i-mode/i-motion/i-Channel ※ i-mode is a paid service that requires a subscription. What is i-mode? ......................... 152 Displaying the i-mode Menu ................. <i-mode menu> ■ Displaying a Site Displaying Sites ........................152 Using Sites ......................... 153 Saving a Site in My Menu ................. <My Menu>...
Page 154: Displaying Sites
Menu name Function What is i-mode? i Menu Connect the FOMA terminal to the i-mode center (P.152). i-mode allows you to use the i-mode compatible FOMA Bookmark Display favorite sites and Internet sites terminal (hereinafter referred to as i-mode terminal) to (P.155).
Page 155: Using Sites
Reconnecting to the Web Page Using Sites Displayed Last Selecting Links or Other Items of Choice The site displayed when you last connected to i-mode is recorded as the Last accessed URL. You can directly When using a site, you may display a linked site, enter connect to this site from the Last accessed URL.
Page 156 Reloading a Page What is Flash? The page, which is displayed incorrectly or updated Flash is an animation technology that uses animation frequently, can be reloaded so that the latest data is and sound. Flash movies enhance site content for displayed.
Page 157 Displaying Using the URL List Changing the i-mode Password Up to 50 sites that have been displayed by entering <Change i-mode password> their URLs are saved in the URL list. The sites can be The “i-mode password” is used for saving/deleting directly accessed from the URL list.
Page 158: Deleting A Bookmark
Displaying a Site Moving a Bookmark to a Different Folder A site can be displayed using a bookmark. Bookmarks can be moved to a different folder using From the i-mode menu, select [Bookmark] and three methods. press Example: Moving a bookmark A list of bookmark folders appears.
Page 159 Deleting a Screen Memo Saving a Site in the Screen Memo You can delete screen memos using three methods. <Screen Memo> Example: Deleting a screen memo You can save sites as your favorite ones in the Screen From the i-mode menu, select [Screen Memo] and Memo.
Page 160: Contents (P
Downloading Data from Sites Using the Phone To/Mail To/ <Download> Web To/i- α ppli To You can download melodies, Chara-den, ToruCa cards, Deco-mail templates, dictionaries, menu patterns, and You can use highlighted information in a site, message, mail (vMessage format) from related sites. mail main body, i-motion Telop text, i-αppli, ToruCa card, ■...
Page 161 [Host name]: Setting i-mode <i-mode setting> Enter a host name within eight full-width or 16 half-width characters. [Host number]: Setting the Connection Timeout Enter a host number within 99 half-width alphanumeric characters and symbols. Default 60 sec [Host address]/[Host address2]: Enter a host address within 30 half-width alphanumeric The duration before disconnecting the FOMA terminal characters and symbols.
Page 162: Receiving A Message
From the i-mode menu, select [i-mode setting] → Setting Auto-display [Auto detect.] and press Default Prefer msgR Select [ON]/[OFF] and press You can set to display the contents of the message The Auto detect. is set. automatically when it is received while in the stand- ●...
Page 163 Protecting a Message Displaying a Message <Message R/Message F> Message R or Message F can be protected from being The list of received messages can be displayed. overwritten. From the i-mode menu, select [MessageR/F] →  An unread message cannot be protected. [MessageR]/[MessageF] and press Example: Protecting Message R ＭｅｓｓａｇｅＲ１／８...
Page 164 Operating the SSL List Setting the FirstPass <SSL certificate> <User certificate> You can issue and download the user certificate from Default CA cert.・DoCoMo cert.1: Valid the FirstPass Center. You can set to validate/invalidate the certificate that is The user certificate certifies that you are a FOMA required to connect to an SSL site.
Page 165 Precautions on the use of FirstPass Changing the Host for ● The packet communication charge is free when you Certificate Issue <Select host> connect to the FirstPass Center. ● The packet communication performed when connecting to a FirstPass-compatible site are covered by the Pake- Default ドコモ...
Page 166 To play back data What is i-motion? Select [Play]. To display detailed information i-motion is movie data that contains both video and sound Select [File property]. tracks. You can play back an i-motion on the FOMA When a link is set in the Telop text When you stop or pause playback, a confirmation terminal and set a saved i-motion for the stand-by display.
Page 167 There are two types of channels: “Basic channel” and What is i-Channel? “Favorite channel”. “Basic channel” is provided by DoCoMo and is pre-registered, and therefore you can The i-Channel service provided by DoCoMo or use it from the moment you start using the i-Channel another IP (information service providers) distributes service.
Page 168 ● When you receive i-Channel information, “ ”→“ ” flashes. Displaying the i-Channel Even if you receive information, the FOMA terminal does not sound the ring tone or vibrate, and the incoming Press (i.ch) in the stand-by display. indicator does not operate, either. ●...
Page 169 Mail Mail Function of the FOMA Terminal .................. 168 What is i-mode Mail? ......................168 <Mail menu> Displaying the Mail Menu ................. ■ Composing i-mode Mail/Deco-mail Composing and Sending i-mode Mail .......... <Compose and send mail> <Compose and send Deco-mail> Composing and Sending Deco-mail ........
Page 170 Mail Function of the FOMA What is i-mode Mail? Terminal When subscribing to the i-mode service, mail can be exchanged with i-mode terminals (including Mova The FOMA terminal provides two types of mail terminals) as well as e-mail over the Internet. functions: i-mode mail and SMS.
Page 171 ● Saving a Secret code 【 Mail Address (Other Settings) If Unable to Receive Mail → Register a Secret Code】 The i-mode center delivers mail to the i-mode terminal The 4-digit Secret code can be saved in addition to right after receiving it. When the i-mode terminal is the mail address when the address is set to “phone powered off or cannot receive radio waves because number@docomo.ne.jp”.
Page 172: Displaying The Mail Menu
● Deco-mail Displaying the Mail Menu You can compose and send original mail by changing the font size or background color and pasting an image <Mail menu> in the main body of the mail when you edit i-mode mail. You can also receive decorated mail. Since there Press (Mail) in the stand-by display.
Page 173 Enter a subject at [ Entering an Address from the Mail List Enter a subject within 15 full-width or 30 half-width characters. You can send mail to several recipients saved in the mail list. Enter the main body at [ Enter the main body within 5,000 full-width or 10,000 half- Press (Func) in the Edit mail display.
Page 174 Press (Pict/Sym) to enter Deco mail Pict.※ ● Even if you delete a decorated character, the data used Press (Func) in the Input text display, select [Deco. for decoration may not be erased and the number of slcted txt]/[Quick deco. Mail]/[Decorate mail], and set characters in the mail main body that you can enter could decorations using the Cross Deco-palette.
Page 175 When you select [Insert line] Select the font/background color and press Insert a line at the line where the cursor is displayed. to select the font color and to select the When you select [Background color] background color. to select the background Ｉｎｐｕｔ...
Page 176: File Attachment
[Others]: File Attachment Select data from Others of the microSD. <File attachment> [Activate camera]: Yo u c a n s e n d i - m o d e m a i l w i t h u p t o 1 0 f i l e Select [Camera]/[Movie] and record images/movies using the camera (P.136, 139).
Page 177 ● You can automatically receive up to 100K bytes of data Saving i-mode Mail to Send in each mail, including the file attachment. You have to manually obtain a file attachment exceeding 100K bytes Later <Save mail> from the i-mode center (P.178). ●...
Page 178 Receiving i-mode Mail after Selecting Replying to i-mode Mail Connect to the i-mode center and select mail to <Reply to mail> receive. You can compose and send replies to the received From the Mail menu, select [Receive option] and mail. press ...
Page 179 Select [New] and press Saving the Mail Address/Phone The screen for selecting where to save appears. Number in the Phonebook When you select [Add] Select an entry to which you want to add the phone number from the Phonebook. Saving the Sender’s/Recipient’s Mail Select [Main memory] and press Address in the Phonebook The Edit phonebook display appears.
Page 180 Example: Saving a file attachment received in mail Deleting a File Attachment From the received mail list, select mail and press You can delete a file that is attached to i-mode mail. Select a file attachment and press (Func).  You cannot delete an i-αppli To link that is displayed in the mail main body.
Page 181 File attachment type Select a folder and press With image attachment The received/sent/saved mail list appears. Received mail With movie attachment Ｉｎｂｏｘ１／２５ Received date/time With melody attachment Sender １５：５１ドコモ一郎 With ToruCa card attachment Ｐｈｏｔｏｃｏｎｔｅｓｔ Subject １２：３４ドコモ二郎 With i-αppli To Ｃｏｎｃｅｒｔｔｉｃｋｅｔｎｅｘｔ With Tool data attachment (Phonebook, ０３／１３携帯なつ子...
Page 182 Example: Adding a folder for received mail Storing the Mail at the Data Security From the Mail menu, select [Inbox], press , and Service Center press (Func). The Function menu appears. You can use the Data Security Service to store up to 10 i-mode mails or SMS messages at one time at the Data Select [Edit folder] →...
Page 183: Deleting Mail
Protecting Mail Displaying i-αppli Mail as Regular Mail Received or sent mail can be protected from being i-αppli mail can be displayed as regular mail. If after overwritten. Up to 500 received mails and 250 sent the i-αppli with mail software is deleted, mail saved in mails can be protected.
Page 184 Sorting Mail Setting the Mail Function of the FOMA Terminal Received or sent mail in a folder can be sorted for <Mail setting> display temporarily. Assigning Separate Folders for Mail Example: Sorting received mail Press (Func) in the received mail list. You can save requirements to sort received or sent mail The Function menu appears.
Page 185 Press (Complete). Setting the Type of Mail/Message to be The sorting requirement is saved. Checked ● If mail satisfies several sorting requirements, the sorting Default Valid requirement with a lower number in the list has higher priority. If you set [None] for sorting requirement, the You can set whether to receive mail, Message R, and sorting requirements lower than the number you set Message F when making inquiries to the i-mode center.
Page 186 Setting a Mail List Playing a Melody Automatically from Mail Default List: List0 to 9, Member list: None Default ON By saving mail addresses in a mail list, you can send mail to all members in the list at the same time. The melody can be set to be played back automatically Up to 10 mail lists can be saved.
Page 187: Message Service
From the Mail menu, select [Mail setting] → subscribe to an overseas telecommunication company other [Attached file pref.] and press than DoCoMo. See the NTT DoCoMo website for information about countries and overseas telecommunication companies Ａｔｔａｃｈｅｄｆｉｌｅｐｒｅｆ． you can use for sending/receiving SMS.
Page 188 Receiving SMS (Short Message Setting SMS (Short Message Service) Service) <Receive SMS> <SMS setting> The FOMA terminal automatically receives SMS. You Default Language: JPN, SMS report: Invalid, Validity: 3 days, can save up to 1,000 received SMS including i-mode SMSC: DoCoMo, Type of Number: International, Address: 81903101652 mail in [Inbox].
Page 189 i- α ppli What is i-αppli? ......................... 188 Downloading i-αppli from a Site ..................189 Running i-αppli ....................<Run i-αppli> Running i-αppli Automatically ................<Auto start> Setting i-αppli for the Stand-by Display ..........<i-αppli stand-by> Managing i-αppli ....................... 195 <i-αppli(microSD)> Displaying i-αppli Data in microSD memory card .........
Page 190: What Is I-Αppli
What is i-αppli DX? What is i- α ppli? i-αppli DX enables you to enjoy i-αppli more By downloading i-αppli from its site, the i-mode conveniently by working in conjunction with the i-mode compatible FOMA terminal (hereinafter referred to terminal information (mail, Redial/Received record, as i-mode terminal) can be made more useful in Phonebook, etc.).
Page 191: Downloading I-Αppli From A Site
Other Features Downloading i- α ppli from a Site ● i-αppli stand-by display You can download i-αppli software from sites and i-αppli stand-by display enables you to set i-αppli save it. for the stand-by display and to receive mail or place ...
Page 192: Running I-Αppli
● If you have deleted preinstalled software, you can Running i- α ppli <Run i-αppli> download it from “SO@Planet”. [i Menu] → [メニュー/検索] (Menu/Search) → [ケータイ電 i-αppli software can be set to run manually. 話メーカー] (Mobile Phone Manufacturers) → [SO@Planet] (Japanese only) Press (i-mode) for over a second in the stand-by...
Page 193 ● Some software applications start up immediately from the Setting i-αppli Operating Conditions site. This means that the software has been downloaded, but not saved. Also note that you cannot save some  It may not be possible to change some items of the saved downloaded software.
Page 194  Scheduling recording of a program Preinstalled Software Once you complete the initial setting, by selecting a desired program and selecting “リモート録画予約” from the menu, Default settings of the preinstalled software are you can connect to the DVD recorder that has an entry in this indicated in the table below.
Page 195 What you can do on this software ● デコメ絵文字ポケット(Deco-mail Emoji Pocket) Subscription and Examination ※1 Setting card information “Deco-mail Emoji Pocket” is i-αppli software dedicated for handling Deco-mail pictographs and provides a facility for easily searching and saving Deco-mail pictographs and you can use Using just like any ordinary pictographs in i-mode mail.
Page 196: Auto Start
Select [SW set] and press Running i- α ppli Automatically The SW set display appears. <Auto start> Select [Valid]/[Invalid] of the Auto start function of the software at [Set]. Enabling/Disabling Auto Start The Auto start is set. Default Yes ● The Auto start does not operate in the following cases.
Page 197: Managing I-Αppli
Select [Stand-by display] → [Cancel] and press Moving i-αppli to a Different Folder [End]: End the i-αppli stand-by display once and redisplay You can move software to a different folder using three without terminating it. methods. [Cancel]: Example: Moving a software Terminate the i-αppli stand-by display.
Page 198: Displaying I-Αppli Data In Microsd Memory Card
Using Various i- α ppli Functions Checking Error History and Trace Result Using the Camera Function from The error histories for the i-αppli stand-by display and the i-αppli results output by the i-αppli trace feature can be displayed. Stand-by err hist When an i-αppli stand-by display is terminated You can use the camera function (P.136) from the by an error, such as being unable to continue software running on the FOMA terminal.
Page 199 Osaifu-Keitai/ToruCa What is Osaifu-Keitai? ......................198 What is the iC transfer service? ..................198 Starting an Osaifu-Keitai-compatible i-αppli ..............198 What is ToruCa? ......................... 199 Obtaining a ToruCa Card ..............<Obtain a ToruCa card> Displaying a ToruCa Card ................. <Display ToruCa> Managing ToruCa Cards ....................
Page 200: What Is Osaifu-Keitai
What is Osaifu-Keitai? What is the iC transfer service? “Osaifu-Keitai” provides convenient i-mode functions The iC transfer service※1 is a service provided for (i-mode FeliCa) that can be performed using the IC transferring all data stored on the IC card at once※2 to card inserted in an i-mode terminal.
Page 201: What Is Toruca
Flow of ToruCa Operation Using the Osaifu-Keitai Hold up and show the Osaifu-Keitai When you hold up and show the FeliCa mark “ ” to a reader in order to obtain a Beep! side of the FOMA terminal to a reading device (reader/ ToruCa card.
Page 202: Displaying A Toruca Card
When you obtain a ToruCa card Select [詳細] (Detail) → [Yes] and press from a reading device (reader/ You obtain a ToruCa(detail) card. writer), the FeliCa Sign flashes in To update a ToruCa(detail) card to green, a beep sounds to notify you the latest status that the card has been obtained, From the Function menu, select...
Page 203: Setting The Toruca Details
To move all ToruCa cards in the folder Searching a ToruCa Card From the Function menu, select [Move] → [Move all] → [Yes] → a folder. You can search for ToruCa cards by genre. To move several ToruCa cards F r o m t h e F u n c t i o n m e n u , s e l e c t [ M o v e ] → Press (Func) in the ToruCa folder list.
Page 204: Setting Whether To Notify That Within The Communication Range
 Up to 20 ToruCa cards are saved in [Used]. When the number From the Menu, select [Settings] → [Application] → of saved cards exceeds 20, the cards with the oldest date/ [IC act. Notice] and press time are deleted, in that order. ＩＣａｃｔ．Ｎｏｔｉｃｅ...
Page 205 Displaying/Editing/ Managing Data ■ Using Still Image Displaying the Saved Image ................<My picture> Editing Still Images ................... <Edit photo> ■ Using Movie <i-motion> Playing Back Movie/i-motion ................Editing Movies ....................<Edit movie> ■ Using Chara-den What is Chara-den? ..................<Chara-den>...
Page 206: Displaying The Saved Image
To change the display quality Displaying the Saved Image Press . By pressing , you can switch the display quality between Normal/Sharp/Dynamic. <My picture>  The following icons show the display quality. Normal You can display images saved in My picture of the Data Box or microSD memory card.
Page 207: Adding Text
Adding Text Editing Still Images <Edit photo> Text can be added to an image of [sQCIF(128×96)], You can edit a JPEG image saved in My picture by [QCIF(176×144)], [QVGA(240×320)], [Stby(240× adding a stamp, a frame, etc. 432)], and [CIF(352×288)]. The style and color of the ...
Page 208 Trimming Part of an Image After Zoom In Converting the Image Size You can specify a part of an image after zooming in on it You can convert an image size into [sQCIF(128×96)], and trim it into a size of [sQCIF(128×96)], [QCIF(176× [QCIF(176×144)], [QVGA(240×320)], [Stby(240×...
Page 209 To hide the icons and guide display Playing Back Movie/i-motion Press (Display). When you press (Display), you can switch the display between standard/simple or turn it off. <i-motion> To display the previous/next movie/i-motion to display the previous movie/i-motion and You can play back movie/i-motion that is saved in display the next movie/i-motion.
Page 210: Editing Movies
● It may take time to display a file list or movie/i-motion Clipping a Movie saved in the microSD memory card. ● If you edit a recorded movie on a PC, etc., “ ” may be You can clip a portion of a movie of [sQCIF(128×96)], displayed instead of the thumbnail.
Page 211 Converting the Image Size Displaying and Operating Chara-den You can convert a [QVGA(320×240)] image size You can display Chara-den characters saved in the movie into the [QCIF(176×144)] image size. Chara-den folder of the Data Box. Example: Converting the image size and saving by overwriting Press ) in the stand-by display, select From the i-motion file list, select a movie, press...
Page 212: Emory Card
Playing Back a Melody microSD memory card <Melody> You can play back an SMF/MFi-format melody that is You can save Phonebook, mail, Bookmark, and other saved in Melody of the Data Box or microSD memory data in the FOMA terminal to the microSD memory card.
Page 213: Displaying Data On The Microsd Memory Card
Inserting and Removing the microSD Displaying Data on the microSD memory card memory card When inserting or removing the microSD memory card, Data saved in the microSD memory card can be make sure to power off and fold the FOMA terminal, displayed and checked.
Page 214: Tup
Folder Setup of the microSD memory card When Displaying the Folders on the FOMA Terminal  When you save a Phonebook entry, text memo, schedule, mail, bookmark, and a ToruCa card from the microSD memory card to the FOMA terminal, they are saved as a file formatted for the microSD memory card. Multiple data records of above categories may be contained in a file of the microSD memory card.
Page 215 When Displaying the Folders on a PC When you save data of the FOMA terminal to the microSD memory card, a corresponding folder is created automatically.  The maximum number of files that can be saved is an estimated number, assuming the blank memory is used. FOMA terminal Estimated max.
Page 216: Data That Can Be Written/Read To And From The Microsd Memory Card
Data That Can Be Written/Read to Saving Data from the FOMA Terminal and from the microSD memory card to the microSD memory card  It may take time to save data depending on the data size. You can copy data from the FOMA terminal to the ...
Page 217: Info
Enter the Security code and press (OK). Checking the Usage Information The screen for confirming whether to save data appears. You can check the usage information of the microSD [Add]: Save the data by adding to the existing data. memory card. [Overwrite]: ...
Page 218: Mode
Terminating the Memory Mode Using the FOMA Terminal with a PC To remove the FOMA terminal from a PC, perform the <Memory mode> procedure to safely remove the hardware on the PC in When you connect the FOMA terminal to a PC using advance, which is slightly different for each OS.
Page 219: Copying Data From The Foma Terminal To The Uim
Copying Data from the FOMA Managing Data Box <Data Box> Terminal to the UIM Data handled by the FOMA ter minal, such as downloaded data and data recorded using the You can copy up to 50 FOMA terminal phonebook camera, are saved in the categories of the Data Box: entries and up to 20 SMS from the FOMA terminal to My picture, MUSIC, i-motion, Melody, and Chara-den.
Page 220 Example: Displaying the file list in the [Preinstall] folder in My Select [Preinstall] and press picture Ｐｒｅｉｎｓｔａｌｌ１／１２ Press ) in the stand-by display. Management title ｂｌｉｓｓｆｕｌｍｏｍｅ Type of memory being displayed ＤａｔａＢｏｘｓｏｏｔｈｉｎｇｓｃｅｎ Source ＭｙｐｉｃｔｕｒｅＭＵＳＩＣｓｉｌｅｎｔｇａｍｅｉ−ｍｏｔｉｏｎＭｅｌｏｄｙｆｌｏｗｅｒｃａｒｐｅｔＣｈａｒａ−ｄｅｎ...
Page 221: Sorting Data
Moving Data to a Different Folder Sorting Data You can use three methods to move data to another Default Date folder or the microSD memory card. Data in a folder can be sorted for display.  You cannot move the Chara-den and data saved in the ...
Page 222 Displaying/Editing Data Information Displaying the Data Box/Data Information You can change the data management title and file Displaying the Data Box Information name, and set file restrictions. The management title is displayed in the file list. Press (Property) in the Data Box. ...
Page 223 ■ List of display items and items that can be edited ◎: Can be edited ○: Display only −: Not displayed My picture Chaku- Movie/ Display item Melody Chara-den Description Uta Full ® i-motion JPEG Flash Management title ◎ ◎ ◎...
Page 224: Moving Copyrighted Data
Moving Copyrighted Data Checking the Memory of the FOMA Terminal <Movable contents> <Storage information> You can encrypt and move a copyrighted image, You can display the memory use status of the FOMA ® i-motion, melody, and Chaku-Uta Full downloaded terminal. You can also check the volume used up by from a site to the microSD memory card.
Page 225: Using Infrared Communication
In Case of Insufficient Memory What is the Infrared Communication? If there is not enough memory when you save or <Infrared communication> download data or software in My picture, MUSIC, You can send and receive the Phonebook, Schedule, i-motion, melody, and Chara-den of the Data Box, Text memo, Bookmark, mail, image, movie, melody, or i-αppli, select and delete data that is no longer and ToruCa card to/from a mobile phone equipped with...
Page 226: Data That Can Be Sent/Received Via Infrared Communication
Data That Can Be Sent/Received via Infrared Communication You can send and receive your Own number, Phonebook, Schedule, Text memo, Bookmark, mail, image, movie, melody, and ToruCa card between mobile phones and other devices equipped with the infrared communication function. ...
Page 227: Receiving Data Using The Infrared Communication
Receiving Data Using the Infrared Sending Data Using the Infrared Communication Communication <Receive Ir data> <Send Ir data> Receiving Data Sending Data From the Menu, select [LifeKit] → [Rcv Ir data] → Select data to be sent and press (Func). [Receive] and press The Function menu appears.
Page 228: Using The Infrared Remote Control
Using the Infrared Remote Control Receiving Data Using iC Communication Once infrared remote control software is downloaded from a site and saved in the FOMA terminal, the FOMA terminal can be used as the TV or DVD player remote control. Receiving Data ...
Page 229: Sending Data Using Ic Communication
Sending Data Using iC Communication Sending Data Select data to be sent and press (Func). The Function menu appears. Select [iC transmission] and press “ ” changes to “ ” and the screen for confirming whether to begin data exchange appears. To send one entry in the Phonebook/Text Memo Move the cursor to the data and from the Function menu, select [iC transmission] →...
Page 231 Playing Music ■ Listening to Music What is MUSIC Player? ....................... 230 Transferring Music Data ...................... 230 ® Downloading Chaku-Uta Full ..................... 232 Playing Back Music Data ..................... 233 Managing the Playlist ......................235 Changing the MUSIC Player Settings ................. 236...
Page 232: What Is Music Player
What is MUSIC Player? Transferring Music Data You can use the MUSIC Player to play back Chaku-Uta If you install SonicStage on a PC, you can transfer ® Full downloaded from an i-mode site. You can also music data from the PC to the microSD memory card play back music data that was saved from a PC in the inserted in the FOMA terminal.
Page 233 P.230. ● When you set the supplied CD-ROM in the PC and if the “FOMA SO703i CD-ROM” window does not appear, click [スタート] → [ファイル名を指定して実行], enter “CD- ROMドライブ名¥SonicStage¥SetupSS.exe” at “名前”, and click [OK]. Check the data according to the displayed messages, and install SonicStage.
Page 234: Downloading Chaku-Uta Full
Connect the FOMA terminal to a PC and set the Transferring Music Data to the FOMA terminal to the Memory mode. microSD memory card Follow the same steps as in “Using the FOMA Terminal with a PC” (P.216, step 1 to 3). You can use SonicStage to transfer music data from a PC to the microSD memory card inserted in the FOMA terminal.
Page 235: Playing Back Music Data
Example: Playing back music data by selecting the artist Playing Back Music Data From the Menu, select [Entertainment] → [MUSIC Player] and press You can use the MUSIC Player to play back music data saved in MUSIC of the Data Box and microSD memory Ｍｕｓｉｃｍｅｎｕ...
Page 236 Select music data and press (Play). Setting How to Display the Music Data List Default Jacket display Current status (During playback/ Stopped) You can select how to display the music data list from The number in the list of the current track/The total number of tracks in the two types.
Page 237: Managing The Playlist
Deleting/Reordering Music Data of the Managing the Playlist Playlist There are two types of playlists that can be played You can delete music data from a playlist or reorder it back using the FOMA terminal. within a playlist. Even if you delete music data from a Original playlist playlist, the files of the music data are not deleted.
Page 238: Changing The Music Player Settings
Changing the MUSIC Player Settings Default Play mode: Normal, Repeat: OFF, Surround: OFF, AVLS: OFF From the Music menu, press (Func), select [Music settings], and press ＭｕｓｉｃｓｅｔｔｉｎｇｓＰｌａｙｍｏｄｅＮｏｒｍａｌＲｅｐｅａｔＯＦＦＳｕｒｒｏｕｎｄＯＦＦＡＶＬＳＯＦＦＲｅｓｅｔｓｅｔｔｉｎｇｓ Select a playback mode for music data at [Play mode].
Page 239 Other Useful Functions <Multiaccess> Multiaccess Feature ..................Multitask Feature ....................<Multitask> Using the Lifetime Calendar ..............<Lifetime Calendar> Starting the Alarm at a Specified Time ..............<Alarm> Saving Schedules ..................... <Schedule> <My Selection> Performing Frequently Used Functions Quickly ........... <Voice memo> Recording Recipient’s or Your Own Voice .............
Page 240: Multiaccess Feature
Placing a Voice Call during i-mode/Packet Multiaccess Feature <Multiaccess> Communication Multiaccess is a function that enables you to use a Example: Placing a voice call during i-mode voice call, packet communication, and SMS functions Press (MENU) dur ing i-mode or packet at the same time.
Page 241 ■ Task icons Activating a New Function Icon Function name Icon Function name Press (MENU) during the activation of a Stand-by Mail setting function. Phone i-mode Phone number entry PushTalk i-Channel Dial PushTalk My Selection i αppli MUSIC Player Own number Display MUSIC folder Phonebook Lifetime Calendar...
Page 242: Using The Lifetime Calendar
Select the date and press Using the Lifetime Calendar The Lifetime Calendar appears displaying one year including the selected day (Detail view). <Lifetime Calendar> ２００７／０３／１４ Display status Ｓｃｈｅｄｕｌｅｆｏｒｔｏ The Lifetime Calendar displays an image, mail, １５２５携帯なつ子 Recorded contents １２...
Page 243 Data Displayed in the Lifetime Calendar Setting the Display of Lifetime Calendar The following data is displayed in the Lifetime Calendar. Default Display setting: All, Memory auto display: Std - JPEG and GIF images saved in My picture of the Data Box You can set the data to be displayed in the Lifetime - Received and sent mail saved in the FOMA terminal Calendar and set whether to automatically display the...
Page 244 Select an alarm tone from MUSIC/i-motion/Melody Starting the Alarm at a of the Data Box at [Alarm]. Specified Time <Alarm>  You can set the following files. File Category File size Image size Default Select alarm・Auto power on: OFF, format Time: 00:00, Repeat: OFF, MUSIC AAC-LC/...
Page 245 Select [ON]/[OFF] at [Auto power on]. Select a starting date and press (Create). [ON]: Ｅｄｉｔｓｃｈｅｄｕｌｅ When the alarm time comes during power off, the FOMA ２００７／０３／０１Ｔｈｕ terminal is automatically powered on and the alarm ００：００ＡｌｌｄａｙＯＦＦ sounds. ２００７／０３／０１Ｔｈｕ [OFF]: ００：００ When the alarm time comes during power off, the alarm 予定...
Page 246 Select [ON]/[OFF] of a holiday at [Holiday]. Setting the Schedule Alarm [ON]: Operations The schedule repeats even on a holiday. [OFF]: Default Alarm: Alarm(std), Alarm volume: 3, Vibrator: OFF, The schedule does not repeat on a holiday, but it is Color: C5:Color5 included in the repeat count.
Page 247 Select an indicator color at [Color]. Deleting a Schedule Select from 12 indicator colors or [C13:ALL] (indicator flashes in 12 colors in sequence). You can delete schedules using the following five When you move the cursor, the indicator flashes methods. accordingly.
Page 248 Setting Holiday Checking the Number of Schedules Saved Default For today: Holidays specified by the National Holidays Law, Day of the week: Sunday The number of schedules saved can be checked as well as the number of schedules still available to be You can set a day or a day of the week as a holiday saved or saved as Secret.
Page 249 Recording Recipient’s or Your Checking the Call Duration and Own Voice Charge <Voice memo> <Call duration/cost> Your own voice during stand-by and the recipient’s Default Last call cost – Voice call ・ Digital: voice during a voice call can be recorded. Last call duration –...
Page 250 Resetting the Total Call Duration and Setting the Limit for Alert on Charge the Total Call Charge <Cost limit notice> The display of the total call duration and charge can be Default Set: OFF, Limit: –, Notification: Alarm+Stand-by reset. The count starts from 0 after the reset. You can set an upper limit amount of call charges to Example: Resetting the total call duration alert yourself with an icon or alarm tone when the total...
Page 251: Using A Memo
Canceling the Icon for Limit Alert Using a Memo <Text Memo> Turn off the notification icon “ ”. Necessary information can be saved in the Text Memo. Up to 10 text memos can be saved. From the Menu, select [NW Services] → [Call Cost/ ...
Page 252: Videophone Message (P
● Do not wind the cord of the Earphone/Microphone around Displaying the Settings of the FOMA terminal. Doing so may cause the radio wave condition to be degraded. Various Functions <Application> ● Placing the cord of the Earphone/Microphone close to the antenna may cause noise.
Page 253: Deleting All Saved Data
Select [ON]/[OFF] of the switch on the Earphone/ Resetting to the Default Microphone at [Set]. Settings [ON]: <Reset settings> Use the switch on the Earphone/Microphone to place a voice call or answer a voice, videophone, or PushTalk call. You can reset the settings of each function to the [OFF]: default settings.
Page 254: List Of Reset Items
List of Reset Items The items in which settings, that are made through the associated Function menus, etc., are reset by executing the Reset settings or Reset all data&set are as follows. For functions that can be accessed through the menu display, see the list of menus (P.270).
Page 255 Network Services This manual provides a brief description of each network service using the approach of operating from the menu of the FOMA terminal. For detailed information on operation of the network services, see the “Mobile Phone User’s Guide 【Network services】 ”. Available Network Services ....................
Page 256: Network Service
From the Menu, select [NW Services] → [Voice Available Network Services Mail] and press You can use the following DoCoMo network services on Set each item. the FOMA terminal. Menu item Operation For details on the outline and how to use each service, Activate Select [Activate] →...
Page 257: Using The Call Waiting Service
From the Menu, select [NW Services] → [Call Using the Call Waiting Service Forwarding] and press When there is another incoming call while you are on a Set each item. call, the in-call ring tone notifies you of the second call. Menu item Operation You can answer the second call by putting the first call...
Page 258: Using The Caller Id Display Request Service
Using the Caller ID Display Using the English Guidance Request Service Service When you receive a voice or videophone call without You can set English voice guidance to be played a caller ID, the Caller ID Display Request Service during various network service settings such as the answers the call with a guidance requesting the Voice Mail Service and when you are outside of the caller to send the caller ID and then automatically...
Page 259: Selecting An Operation For An Incoming Call During A Call
Selecting an Operation for an Using the Multi Number Service Incoming Call during a Call <Arrival Call Act> The Multi Number Service enables you to add up to two numbers, Additional No.1 and Additional No.2 in Default Answer addition to the Basic Number, as your FOMA terminal phone numbers.
Page 260: Using Officeed
● If you do not yet subscribe to the Multi Number Service, Saving a New Service to Use It use the FOMA terminal with the Multi Number call set to [OFF]. <Additional service (USSD) registration> ● If the Multi Number call is set to Ｃａｌｌｉｎｇ...
Page 261 Data Communication For detailed information on Data Communication, see the “Manual for Data Communication” (PDF format) included in the supplied CD-ROM. You need Adobe Reader (Version 6.0 or later is recommended) to read the “Manual for Data Communication” (PDF format). If Adobe Reader is not installed on your PC, install it from the same CD-ROM, which also contains the Adobe Reader software.
Page 262 Precautions on Use About Data Communication You can use the FOMA terminal for three types of data Usage Fee of Internet Service Provider communication, packet communication, 64K data When you use the Internet, a usage fee is required for communication, and data transfer. your Internet service provider.
Page 263  FOMA USB Cable (optional) or FOMA USB Cable with Charge capabilities for packet communication on the FOMA network. Function 01 (optional) To take full advantage of the communication performance of  Supplied CD-ROM “FOMA SO703i CD-ROM” the FOMA terminal, you must perform this communication settings. ●...
Page 264 Preparations and Flow of Data AT Commands Communication AT commands are the commands (instructions) that are executed on a PC for setting and changing the The preparations required for performing packet and functions of the FOMA terminal. 64K data communication by connecting the FOMA For more information on the AT commands, see terminal to a PC are given below.
Page 265 Entering Text For kuten codes, see the “Kuten Code List” (PDF format) included in the supplied CD-ROM. You need Adobe Reader (Version 6.0 or later is recommended) to read the “Kuten Code List” (PDF format). If Adobe Reader is not installed on your PC, install it from the same CD-ROM, which also contains the Adobe Reader software.
Page 266: About Entering Text
■ Entering a character assigned to the same key twice About Entering Text or more in succession After entering the first character, move the cursor. The overview of the text entry is described here.  Characters including JIS level 1 and level 2, 6,355 kanji are ■...
Page 267 Press three times and press five times. Press ＩｎｐｕｔＴｅｘｔＭｅｍｏＩｎｐｕｔＴｅｘｔＭｅｍｏけんと検討けんと検討健闘剣道検討健闘見当拳闘見当県道ケント県とけんとうケントウ件と券と権と健とケントウ謙と憲と建と研と The characters “んと” are entered and the matching words The matching words list for “けんとう” is displayed. list for “けんと” is displayed. To finalize this word To set the User conversion mode temporarily Press...
Page 268: Entering Common Phrases
Press (OK). Entering Common Phrases The selected pictographs are entered all at once. For common phrases, see P.284. ● Deco mail Pict. can be entered only in the Edit mail and  Common phrases that are available vary depending on the Edit signature displays.
Page 269: Cutting/Copying/Pasting Text
Select a name → an item to be quoted and press Select the End point and press The selected item appears in the text input display. The range of characters to be copied is set and saved in the clipboard. ●...
Page 270: Restoring The Default Settings
Example: Saving a word in the Prediction dictionary Using the Downloaded From the Menu, select [Settings] → [Application] → Dictionary [Input method] → [Edit prediction] and press <Download dictionary> The Prediction dictionary display appears. Up to 20 dictionaries can be downloaded using i-mode To add a word to the User dictionary for use with the FOMA terminal.
Page 271 Appendix/ External Device Interface/ Troubleshooting List of Menus ........................270 Preinstalled Data ......................... 278 Characters Assigned to Keys ..................... 281 Special Symbols ......................... 282 Pictographs ........................282 Face Marks ......................... 283 Common Phrases ......................284 Multiaccess Combinations ....................285 Multitask Combinations ...................... 286 Services Available on the FOMA Terminal .................
Page 272: List Of Menus
List of Menus  You can enter the figure next to some menu names listed below in the menu display to execute the associated function. ■ Normal mode ○: The default setting/s is/are restored. ●: Items deleted Reset Reset all Menu Default Setting Page...
Page 273 Reset Reset all Menu Default Setting Page settings data&set i-mode i Menu − P.152 Bookmark − ● P.155 Screen Memo − ● P.157 Go to Enter URL − ● P.155 location URL list − ● P.155 Last accessed URL − ●...
Page 274 Reset Reset all Menu Default Setting Page settings data&set − LifeKit Data Connect to Center P.97 Security − Sent/rec’d PB data P.98 Service Service Send phonebook img P.97 ○ ○ [65] setting ○ ○ Alarm Select alarm P.242 [66] ○ ○...
Page 275 Reset Reset all Menu Default Setting Page settings data&set Settings Call Incoming Videophone Link incoming call: OFF, Ring P.100 tone: 着信音1, Ring volume: 3, Incoming image: テレビ ○ ○ 電話発着信中, Vibrator: OFF, Color: C9:Color9 PushTalk R i n g t o n e : 着信音1 , R i n g volume: 3, Vibrator: OFF, ○...
Page 276 Reset Reset all Menu Default Setting Page settings data&set Settings Application Mail (See [Mail] → [Mail setting]) − i-mode (See [i-mode] → [i-mode setting]) − i αppli (See [i αppli] → [i αppli setting]) − Phonebook Which PB to use Phonebook ○...
Page 277 Reset Reset all Menu Default Setting Page settings data&set Settings Management Manner ○ ○ P.106 mode Mode Manner ○ ○ Original manner Vibrator: OFF, Phone volume: SD (Step down), Mail volume/ Alarm volume: 3, Keypad ○ ○ sound: 1, Charge sound/ Battery ALM: ON, Whisper mode: OFF Change code...
Page 278 Reset Reset all Menu Default Setting Page settings data&set NW Services Caller ID Activate − P.256 Request Deactivate − Check setting − Call Cost/ Last call cost Voice call P.247 Duration Digital Last call Voice call 0:00 ● duration Digital 0:00 Total call cost Total calls cost 0YEN...
Page 279: Simple Mode
■ Simple mode Menu Page Phone [1] Phonebook [11] P.92 Call record [12] P.49 Record message [13] Set rec msg [131] P.66 Play rec msg [132] P.68 Play Vphone msg [133] P.68 Own number [14] P.41 Mail [2] Inbox [21] P.178 Outbox [22] P.178 Draft...
Page 280: Preinstalled Data
Preinstalled Data ■ My picture ● Preinstalled blissful moment soothing scenery silent game flower carpet LocoRoco LocoRocoDrama 音声発着信中テレビ電話発着信中テレビ電話（代替）テレビ電話動作中パケット通信メール受信完了 ● Stamp&Frame ● The color and image for [LocoRocoDrama] change in synchronization with the time zone. Appendix/External Device Interface/Troubleshooting...
Page 281 ● Deco-mail picture ©Disney ● Deco-mail pictograph ©Disney Appendix/External Device Interface/Troubleshooting Continued...
Page 282 ■ i-motion ■ Menu pattern ●Preinstalled Romantic Gold Aqua White Misty Black LocoRoco Symbol Movie ■ Templates LocoRoco誕生日 LocoRocoお疲れ様 LocoRoco遊ぼうげんき？ News! ■ Quick deco. Mail Appendix/External Device Interface/Troubleshooting...
Page 283: Characters Assigned To Keys
Characters Assigned to Keys Character mode Kanji/Hiragana mode Katakana mode Alphabetic mode Numeric mode Keys ※ ※ ※ アイウエオあいうえお . @ ／： − ∼ ァィゥェォぁぃぅぇぉか...
Page 284: Special Symbols
Special Symbols  Symbols marked with ■ may not be displayed correctly when sending to i-mode non-compatible mobile phones or PCs. ■ Full-width symbols ■ Half-width symbols Pictographs  Pictographs may not be displayed correctly when sending to i-mode non-compatible mobile phones or PCs. ...
Page 285: Face Marks
Face Marks When you enter the following words in the kanji/hiragana mode, Kao moji (face marks) are entered.  Some of the following face marks may be different from those actually displayed. ※ Face marks that belong to other than the “かお” category appear only when the Prediction conversion is used. Word Kao moji Word...
Page 286: Common Phrases
Common Phrases Category Common phrase .co.jp .go.jp Internet @docomo.ne.jp .ne.jp .com http:// https:// .or.jp .ac.jp www. KAO MOJI1 KAO MOJI2 KAO MOJI3 Greetings おはようございますお疲れさまでしたおやすみなさいお世話になっております昨日は、どうもありがとうございましたこんにちは行ってきますこんばんはいってらっしゃいよろしくお願い致します Business 直行します本日の会議は中止となりました直帰します出欠をご連絡ください休暇をとります...
Page 287: Multiaccess Combinations
Multiaccess Combinations The table below indicates whether another event or task is available for each task in progress.  The FOMA terminal may not operate as indicated in the table below depending on its condition. ○: Available ×: Unavailable △: Available if you subscribe to the Voice Mail Service, Call Waiting Service, or Call Forwarding Service Another event or task Voice V.phone...
Page 288: Multitask Combinations
Multitask Combinations The table below indicates whether another function is available for each function in the menu.  The FOMA terminal may not operate as indicated in the table below depending on the status of each function.  The functions marked with ■...
Page 289: Services Available On The Foma Terminal
※1 For the multitask combination to the Receive option, see the following functions. Recv option setting is [ON] : See “Display site” or “Dur display site”. Recv option setting is [OFF] : See “Mail setting”. ※2 Besides the function for displaying a site, functions for displaying the screen memo, Message R/F, and i-Channel are included.
Page 290: Optional And Related Devices
● Style-Up Panel SO01 ※1 For use overseas, a plug adapter that fits the electrical outlets in the country you stay is needed. ※2 FOMA In-Car Hands-Free Cable 01 is required to connect to FOMA SO703i using USB or charge FOMA SO703i.
Page 291: Troubleshooting
Troubleshooting First, check if the software update is necessary for the FOMA terminal. If necessary, perform the software update (P.299). Trouble Cause and Remedy  Check if the battery pack is attached properly (P.34). Cannot power on the FOMA terminal. ...
Page 292 Trouble Cause and Remedy  If multiple ring tones are set for voice/videophone call, the A ring tone other than that you set sounds for an incoming call. ring tone sounds in the following order of priority (P.88, 91, 100, 257). 1.
Page 293: Error Messages
Error Messages  In some cases, a 3-digit number may be displayed together with a message. This is a DoCoMo own code that DoCoMo displays on the FOMA terminal. Camera function error. Save the Check SMS Center setting data and quit the application ...
Page 294 Content length exceeds replayable Data transmission is frequent. Exceeds max number of simultaneous size for i-motion Continue transmission? call  Failed to retrieve the data be-  This message appears when the  This message appears when cause its volume has exceeded number of times of communica- you originate a PushTalk call the maximum size.
Page 295 Invalid data (XXX) Invalid UIM. Start not possible Main memory shortage  You tried to connect to the site,  Unable to start software because  The remaining memory on the etc. not supporting i-mode. the information on a UIM inserted FOMA terminal is insufficient.
Page 296 No response (408) PIM locked  The communication is interrupted  The PIM lock is set. Cancel the because there is no response PIM lock and then retry the opera- No content is available (204) from this site. Retry the operation tion (P.123).
Page 297 Replay period has expired Server is busy SSL session cannot be established  This file is provided with an expiry  The software update is not avail-  The SSL session failed. Connect date or a term limitation for play- able because the server is busy.
Page 298 This site is not certified. Connect? Too much data was entered URL is too long to register  The certificate of the site is not  Failed to send because of too  Failed to save the site as a book- supported by the FOMA terminal.
Page 299: Warranty And After Sales Services
Warranty and After Sales Services Warranty ● Make sure that the warranty is received with the FOMA terminal upon purchase. Check to be sure that the name of the retailer, date of purchase, and other items have been filled out on the warranty before storing it in a safe place.
Page 300: Ｉモード故障診断 (I-Mode Trouble Diagnosis) Site
◎ Precautions ● Never modify the FOMA terminal or accessories.  Doing so may result in fire, injuries or malfunctions.  The technical standards of the FOMA terminal and UIM are stipulated by law and standards to prevent radio interference and network malfunctions. FOMA terminals or UIM that do not satisfy the technical standards must not be used.
Page 301: Updating The Software
● Access to the “ｉモード故障診断” (i-mode trouble diagnosis) site i-mode site : [i Menu] → [お知らせ] (Information) → [サービス・機能] (Service/Function) → [ｉモード] (i-mode) → [ｉモード故障診断] (i-mode trouble diagnosis)  No packet communication charge is required for access to the i-mode trouble diagnosis site. ...
Page 302  When you update the software, your mobile phone-specific information (such as model and manufacturer’s serial number) is automatically sent to the server (server for updating the software under DoCoMo’s supervision). DoCoMo will not use the information sent from your mobile phone for any purposes other than to update the software.
Page 303 Updating the Software Immediately (Now update) From the screen for selecting the update type, select [Now update] and press then press (OK). ＳＷＵｐｄａｔｅＲｅａｄｙｔｏＤｏｗｎｌｏａｄｉｎｇｄｏｗｎｌｏａｄ？Ｎｏｔｉｃｅ：ＣｏｎｎｅｃｔｉｎｇＮｏｆｕｎｃｔｉｏｎｓａｒｅａｖａｉｌａｂｌｅｅｘｃｅｐｔｒｅｃｅｉｖｅｃａｌｌｓ After a while, the software download starts.  When downloading starts, step 2 and step 3 are performed automatically (no need to operate). To cancel the download Press (Cancel) while downloading.
Page 304 Reserving a Date/Time for the Software Update (Reserve) If downloading takes too long or the server is congested, you can connect to the server and preset a date/time to start the software update. Example: Reserving the software update on March 11 (Sun) 1:05 a.m. From the screen for selecting the update type, select [Reserve] and press The FOMA terminal connects to the server and displays a list of Ｌｉｓｔｏｆｃｈｏｉｃｅ...
Page 305: Protecting Your Mobile Phone From Harmful Data
Confirming the Reservation From the Menu, select [Settings] → [Management] → [SW Update] and press The Security code screen appears. Enter the Security code and press (OK). If the software update is already reserved, the reserved information Ａｌｒｅａｄｙｒｅｓｅｒｖｅｄ appears. ｆｏｒ２００７／０３／１１Ｓｕｎ...
Page 306 Select [Valid] at [Scan function]. [Valid] : Execute the scanning function. If data that can cause a trouble is detected, a warning is displayed in five levels. [Invalid] : Do not execute the scanning function. When you change the setting Select [Yes].
Page 307 Setting Whether Pattern Definitions Are Automatically Updated You can set whether to update the pattern definitions automatically. From the Menu, select [Settings] → [Management] → [Scan function] → [Set auto- update] and press : Update the pattern definitions automatically. [Valid] Ｓｅｔａｕｔｏ−ｕｐｄａｔｅ...
Page 308: Specifications
From the Menu, select [Settings] → [Management] → [Scan function] → [Version] and press ＶｅｒｓｉｏｎＰａｔｔｅｒｎＤｅｆｉｎｉｔｉｏｎｓＶｅｒｓｉｏｎ１．１ Specifications Product name FOMA SO703i Dimensions 105×47×18.7 mm (H×W×D) (when folded) Weight About 104 g (with battery pack attached) Continuous stand-by time Stationary state: About 600 hours Moving state: About 450 hours...
Page 309: Number Of Saved Data Items
Number of Saved and Protected Data Items Number of protected Type Number of saved data items data items Phonebook Up to 1,000 − Schedule Up to 300 − Text memo Up to 10 − Mail Received mail※1 Up to 1,000 Up to 500 (Total number Sent mail※1...
Page 310: About The Specific Absorption Rate (Sar) Of Mobile Phones, Etc
About the Specific Absorption Rate (SAR) of Mobile Phones, etc. SAR Certification Information This model phone FOMA SO703i meets the MIC’s* technical regulation for exposure to radio waves. The technical regulation established permitted levels of radio frequency energy, based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies.
Page 311 Index/Quick Manual Index ..........................310 Quick Manual ........................316...
Page 312 Index How to Look up in the Index The index can be used as an “alphabetical table of contents”. Under each headword, terms relevant to it are listed. Not only terms representing function names actually displayed on the FOMA terminal, but also those that are a brief summary about the functions described in this manual. Example: Adjusting the volume of i-αppli software Volume i-αppli ........
Page 313 Chaku-moji ......... 51 DC adapter ......... 36 Rotate ........206 Place a call ......52 Deco-mail ......... 170 Select size ......206 Received record..... 49 Compose and send message ... 171 Text stamp ......205 ® Chaku-Uta Full ......232 Decorate mail .......
Page 314 Reception ......226 Clear Recv ranking ....185 Save ........214 Transmission ......227 Clear Send ranking ....185 Send Ir data ......225 i-Channel ........165 Compose and send ..... 170 Sort ........219 Channel list ......166 Confirm title ......178 Stand-by display ....
Page 315 Keypad light ......110 Melody auto play ....184 Slideshow ......204 Keypad sound ......102 Protect ON/OFF ....161 Sort ........219 Kuten codes ......267 Receive ........ 160 Store at Center ..... 206 Save attached ...... 178 My Selection ......246 Message F ........
Page 316 Phonebook image ....109 PushTalk setting ......82 Display ......... 245 Place a call ......92 PushTalkPlus ......82 iC transmission ..... 227 Quote ........266 Memory status...... 246 Save ......87, 89, 214 Save ......214, 243 Save image setting ....93 Schedule alarm ....
Page 317 Stand-by disp......107 ToruCa ........199 Incoming set ......100 Stereo&3D ........ 102 Attach to mail ....... 174 Missed call ......65 Storage info ......222 Auto recognition ....201 On hold ........62 Style-Up Panel ......37 Delete ........201 Quick record message...
Page 318 Quick Manual Using the Quick Manual To bring the Quick Manual provided with this manual, separate it at the tear-off line and fold as shown below. ■ Cutting the pages Separate the pages of the Quick Manual at the tear-off line. Tear-off line ■...
Page 323: Manner Mode (P
Don’t forget your FOMA terminal or your manners! When you use the FOMA terminal, be careful not to disturb others around you. Power off the FOMA terminal in the following cases ● When you are in a place where the use is prohibited In airplanes and hospitals, power off the FOMA terminal.
Page 324 NTT DoCoMo Kyushu, Inc. Manufacturer: Sony Ericsson Mobile Communications Japan, Inc. To prevent damage to the environment, bring used battery packs to an NTT DoCoMo service counter, an NTT DoCoMo agent This manual is printed using an ink Li-ion or a recycle center.
Page 325 This manual provides instructions on how to install the SO703i communication configuration files (drivers) and FOMA PC Setup Software that are both included in the supplied CD-ROM as well as information necessary for performing data communication on the FOMA SO703i. ■ Operations on Windows XP This manual assumes that you use Windows XP Service Pack 2 as your operating system.
Page 326: About Data Communication
Precautions on Use About Data Communication Usage Fee of Internet Service Provider You can use the FOMA terminal for three types of data communication, packet communication, 64K data When you use the Internet, a usage fee is required for communication, and data transfer. your Internet service provider.
Page 327: Security Settings
PC.  Supplied CD-ROM “FOMA SO703i CD-ROM” - Yo u r P D A m u s t h a v e F O M A p a c k e t a n d 6 4 K d a t a communication support.
Page 328: Preparations And Flow Of Data Communication
Preparations and Flow of Data Connecting the FOMA Terminal Communication to a PC The preparations required for performing packet and Connect the FOMA terminal to a PC when they are 64K data communication by connecting the FOMA powered on. terminal to a PC are given below. Open the external connection terminal cover.
Page 329: Installing The Communication Configuration Files (Drivers)
The confirmation window appears. software. Click [OK]. Set “FOMA SO703i CD-ROM” in the CD-ROM drive The Terms of Use for FOMA SO703i USB Driver appears. of the PC. Check the contents and click [はい] to accept the terms. When you click [いいえ] Installation is canceled.
Page 330 Click [OK]. Check the name of the program to be deleted and click [はい]. The Terms of Use for FOMA SO703i USB Driver appears. The uninstallation of the communication configuration files Check the contents and click [はい] to accept the (drivers) starts.
Page 331  Before starting installation, quit all programs that are running. Put a checkmark for [タスクトレイに常駐する] and Example: When using Windows XP click [次へ]. Set “FOMA SO703i CD-ROM” in the CD-ROM drive of the PC. After installation, “W-TCP setting” icon is resident in the task tray.
Page 332 グラムの追加と削除]. When using Windows 2000 Professional Click [スタート] → [設定] → [コントロールパネル] and then double-click [アプリケーションの追加と削除]. Select [NTT DoCoMo FOMA PC設定ソフト] and When using Windows 2000 Professional Click [スタート] → [プログラム] → [FOMA PC設定ソフト]. click [削除]. Easy Setup (Packet Communication) When Using “mopera U”...
Page 333 Put a checkmark for [最適化を行う] and click [次へ]. Click [追加] and set a host (APN) and click [OK].  If you have performed the optimization already, the Set 2 or a number between 4 and 10 for cid. window for optimization does not appear. Check the setting information and click [完了].
Page 334 If dial-up information for the provider you subscribe to or “<” “>” “|” “”” and “!”. in-house LAN is required, enter the appropriate address  If [FOMA SO703i] is not set for [モデムの選択], select and click [OK]. [FOMA SO703i]. Click [次へ].
Page 335 Enter [ユーザー名] and [パスワード], and click [ダ When Using Windows XP イヤル]. You can set optimization for each dial-up connection.  You can connect with [ユーザー名] and [パスワード] left blank when using “mopera U” or “mopera”. Example: Optimizing the system settings The connection is established.
Page 336: Setting Communication Without The Foma Pc Setup Software
To add a host (APN) Remove the checkmark from the host for which to Click [追加]. cancel the optimization. To edit (change) a host (APN) Click [編集]. To delete a host (APN) Select a host (APN) and click [削除].  You cannot delete a host (APN) saved as [cid1] and [cid3].
Page 337 To reset a host (APN) Enter a dummy (nonexistent) phone number (such Input format as “0”) at [電話番号], select [FOMA SO703i] at [接 AT+CGDCONT= (Reset all cid) AT+CGDCONT=<cid> (Reset a specific cid only) 続方法], and click [OK]. To display a current host (APN) The connection window appears.
Page 338 [次へ]. Check each item of the [全般] tab.  When multiple modems are connected to a PC, put a Select [ダイヤルアップモデムを使用して接続する] checkmark only for [モデム - FOMA SO703i] at [接続 and click [次へ]. 方法].  Remove the checkmark from [ダイヤル情報を使う].
Page 339 <cid>.  When multiple modems are connected to a PC, put a For 64K data communication checkmark only for [モデム - FOMA SO703i] at [接続方法]. Enter the phone number of a host.  Remove the checkmark from [ダイヤル情報を使う].
Page 340 Click the [ネットワーク] tab, check each item, and Performing the Dial-up Connection click [設定]. Connect the FOMA terminal to a PC before starting this  Select [PPP:Windows 95/98/NT4/2000, Internet] for [呼び出すダイヤルアップサーバーの種類]. operation.  Put a checkmark only for [インターネットプロトコル Example: When using Windows XP (TCP/IP)] for component.
Page 341: At Commands
AT Commands AT commands are the commands (instructions) for setting and changing the functions of the FOMA terminal on a PC. ■ Input format of AT commands Always enter an AT command by adding AT at the beginning of the command. Be sure to use half-width alphanumeric characters.
Page 342: At Command List
AT Command List AT commands that can be used for FOMA SO703i are listed below. [&F] : Commands that have their settings initialized by the AT&F command. [&W] : Commands that have their settings saved by the AT&W command. You can use the ATZ command to call back the setting value.
Page 343 Command Outline/Parameter Input example AT+CGEQMIN=[<cid.[,,<n>[,<m>]]] Saves the criteria for permitting or not permitting QoS (Quality of Service) AT+CGEQMIN=2,,64,384 notified from the network when packet communication is established. AT+CGEQMIN=2,,64 AT+CGEQMIN=2,,,384 cid=1-10 Used for managing hosts (APN) saved in the FOMA terminal for AT+CGEQMIN= ※1 packet communication AT+CGEQMIN=<cid>...
Page 344 Disconnects packet or 64K data communication. ATI<n> Displays an identification code. ATI0 Displays “NTT DoCoMo” (When the parameter is omitted). Displays the name of the FOMA terminal. Displays the version of the FOMA terminal. Switches from the online command mode to the online data mode during communication.
Page 345 Command Outline/Parameter Input example ATS2=<n> Sets an escape character. ATS2=0 ATS2? n=0-126 43: Default, 0: When the parameter is omitted [&F] n=127 Disables the escape operation. ATS3=<n> Sets a carriage return (CR) character that can identify the end of an ATS3=13 AT command character string.
Page 346 ■ Extended result codes List of Reasons for Disconnection ● &E0 ■ Packet communication Displays the connection speed between the FOMA terminal and the base station. Value Reason Numeric value indication Text indication Connection speed An APN is not found or is incorrect. CONNECT 32000 32,000bps Disconnected from the network.
Page 347: Kuten Code List
Kuten Code List ’07.2 (Ver.1) A-CKX-100-11(1)
Page 348 In the following Kuten code list, a 4-digit kuten code is expressed by the combination of the row for the first three digits and the column for the last digit. Example: When you wish to input “★” (corresponding to kuten code “0190”), locate it in the Kuten code list and determine the kuten code for it from its row (“019”) and column (“0”).

NTT docomo FOMA SO703i Manual

Easy Search (P.4)

Functions

Before Using the Foma Terminal

Pushtalk

Sound/Display/ Light Settings

Camera

I- Α Ppli

Osaifu-Keitai/Toruca

Displaying/Editing/ Managing Data

Playing Music

Network Services

Entering Text

Appendix/ External Device Interface/ Troubleshooting

Quick Links

Chapters

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for NTT docomo FOMA SO703i

Summary of Contents for NTT docomo FOMA SO703i