Table of Contents
Advertisement
When you record an image while the Auto
orientation is set to [ON], the image may be
displayed in an orientation different from that
seen in the FOMA terminal in the following cases.
- When attaching an image to mail or posting it
on a blog
- When transferring an image to a PC, etc. using
USB
Decorating Images Fashionably
Using the Deco-Snap Mode
Using frames and stamps, you can decorate
images recorded using the Auto timer in
fashionable way as a memorable picture.
For Out-camera recording, you can select an image
size of [QCIF(144
[VGA(480 640)], and [Stby(480 864)]. For In-
camera recording, you can select the image size of
[QCIF(144 176)] and [QVGA(240 320)].
You can set the sound for the Deco-Snap as the
sound of the Auto timer used for the Deco-Snap
recording.
When the Shoot mode is set to [Deco-Snap], the
following items are changed temporarily. The
items other than Select size, Switch camera, and
EV(Whitening mode) cannot be changed.
Item
Select size
Switch camera
Select scene
EV
Set attach loc. info OFF
Auto focus
Auto timer 2
Photo light
Grid Line
White balance
Photometry
Picture effect
Auto save
Image quality
Auto orientation
1 The listed setting of the Auto focus is the setting
for use of the Out-camera. The function does not
operate when recording with the In-camera.
2 The previous setting of the Auto timer is not
restored even if the Shoot mode is changed.
Once you set the Shoot mode to [Deco-Snap], the
zoom magnification is set default to [ 1.0] even if
the Shoot mode is changed to other setting.
144
176)], [QVGA(240
Setting
QVGA(240 320)
In camera
AUTO
Whitening mode [OFF] : ±0.0EV
Normal mode 1
5sec
OFF
OFF
AUTO
Average
OFF
OFF
Fine
OFF
1
Press
display, select [
[
] (Deco-Snap), and press
The Shoot mode is set to [Deco-Snap] and "
appears.
To switch the camera
320)],
From the Function menu, select [
camera)
To set the Select size
From the Function menu, select [
To record an image with a frame
From the Function menu, select [
[
] (ON)/[
a frame.
To change the sound for Deco-Snap
From the Function menu, select [
beep)
To set the Whitening mode
From the Function menu, select [
mode)
When the Whitening mode is set to [ON], the
EV is set to +1.0EV for the Out-camera and
+0.3EV for the In-camera. When set to [OFF],
the EV is set to ±0.0EV.
(Func) in the Camera mode
] (Shoot mode)
[
] (Out camera)/[
] (In camera).
] (OFF). If you select [ON], select
a sound for Deco-Snap.
[
] (ON)/[
] (OFF).
.
"
] (Switch
]
a size.
] (Frame)
] (Deco-Snap
] (Whitening
Advertisement
Chapters
Table of Contents
