Preparations And Flow Of Data Transfer (Obex™ Communication); Preparations And Flow Of Data Communication - NTT docomo FOMA SO906i User Manual

Preparations and Flow of Data
Transfer (OBEX™ Communication)
To use the FOMA USB Cable with Charge
Function 01/02 (optional), install the FOMA
communication configuration files.
Install the FOMA communication configuration files
(USB drivers).
 Install from the supplied CD-ROM
or
 Download from the DoCoMo's website and install
Data transfer
Preparations and Flow of
Data Communication
The preparations required for performing
packet and 64K data communication by
connecting the FOMA terminal to a PC are
given below.
Install the FOMA communication configuration files (USB drivers).
 Install from the supplied CD-ROM
or
 Download from the DoCoMo's website and install
Connect the FOMA terminal to a PC.
Check the installed FOMA communication configuration files.
When you use the
FOMA PC setup
software
Install the FOMA PC setup software.
Set a host.
Packet 64K data
communication communication
 "mopera U" or  "mopera U" or
"mopera" "mopera"
 Other provider  Other provider
Perform communication.
Start up communication software that is
compatible with AT commands.
Set ON/OFF for the Notify caller ID.
Set up the dial-up network.
Perform dial-up connection.
When you do not
use the FOMA PC
setup software
Set a host.
425