NTT docomo FOMA SO906i User Manual page 162

2
Locate the JAN/QR code at the center of
the display and press
The scanning of the JAN/QR code starts.
When the scanning is completed, the end sound
is heard and the data that has been scanned is
displayed in the normal display.
To save a scanned URL as a bookmark
Move the cursor to the URL and from the
Function menu, select [Add bookmark]
a folder.
To save scanned data such as a phone number
Move the cursor to data such as a phone number
and from the Function menu, select [Add to
phonebook]
in the Phonebook.
 Follow the same steps as in "Add to FOMA
terminal phonebook" (P.91, step 3 to 6) or "Add
to UIM phonebook" (P.94, step 3 to 4).
3
Press (Save).
The data from the scanned JAN/QR code is saved.
Some QR codes allow you to save data such as
a name, phone number, and mail address all at
once in the Phonebook just by scanning them.
When scanned characters cannot be entered in
the text editing display, they are replaced with as
many spaces (blanks).
A scanned image may not be saved depending
on its image or file size.
160
(Scan).
[Yes] and save the scanned data
Displaying the Saved Data
You can save up to 10 data entries for JAN or
QR codes that are scanned.
 When a total of 10 data entries is saved and a new
JAN/QR code is scanned, unprotected data is
overwritten from the oldest.
1
From the Menu, select [LifeKit]
code reader]
.
[Yes]
To delete data
Move the cursor to the data and from the
Function menu, select [Delete]
[Yes]. To delete several data, from the Function
menu, select [Delete]
data, press
To delete all data, from the Function menu, select
[Delete]
and select [Yes].
To protect data
Move the cursor to the data and from the
Function menu, select [Protect ON/OFF]
" " changes to " ".
2
Select the data and press
[Saved data] and press
[Delete one]
[Select&delete], select
(Complete), and then select [Yes].
[Delete all], enter the Security code,
.
[Bar
[Yes].