NTT docomo FOMA SO906i User Manual page 420

Menu
item
Set call/ To identify the call placed or received using
receive Number B, set the font color and ring tone of
No. the incoming/receiving call display.
Set the font color
Select [Set call/receive No.]
No.] [dark]/[light]/[Normal].
Set the ring tone
Select [Set call/receive No.]
for Number B]
V.phone]/[Mail]
from MUSIC/i-motion/Melody of the Data
Box.
 You can set the following files.
Category File format File size Image size
MUSIC
i-motion
Melody
Some files may not be set.
 If you select [ON] at [Link incoming call],
the ring tone for the Incoming V.phone
follows the setting for the Incoming call.
 When you receive a call without the caller
ID, the ring tone follows the setting of
[Ringtone for Number B].
Set the illumination indicator
Select [Set call/receive No.]
for Number B]
V.phone]/[Mail]
illumination indicator
 When receiving a videophone call, if you
select [ON] at [Link incoming call], the
illumination indicator follows the setting
of the Incoming call.
 When the Illumination is set to [OFF],
you cannot set the illumination indicator
(P.114).
2in1 Quit using the 2in1 functions.
function Select [2in1 function OFF]
OFF
Receive Set the restriction for incoming call of Number
avoid. A and Number B.
setting Set the restriction for incoming call for
Number A and Number B individually
Select [Receive avoid. setting]
receive avoid.]
A)]/[Rcv. avoid. (Number B)]
[Avoid]/[Unchange]
418
Operation
[Disp. call/rcv.
[Ringtone
[Incoming call]/[Incoming
[Ring tone] a ring tone
AAC-LC/ Max. 5M
HE-AAC bytes
MP4 Max. 10M Max. [VGA
bytes (640 480)]
SMF/ Max. 350K
MFi bytes
[Ringtone
[Incoming call]/[Incoming
[Illumination]
[Yes].
[Rcv. avoid. (Number
[Receive]/
(Complete).
Menu
item
Receive Check the current setting
avoid. Select [Receive avoid. setting]
setting receive avoid.]
Activate/deactivate the Mode link
When the A mode is used, allow to receive
a call only for Number A. When the B mode
is used, allow to receive a call only for
Number B. When the Dual mode is used,
allow to receive a call for both Number A
and Number B.
Select [Receive avoid. setting]
setting]
 When the Mode link setting is "Activate",
S e t t h e R e c e i v e a v o i d . s e t t i n g f ro m
overseas
Select [Receive avoid. setting]
avoid. set(Int.)]
the guidance.
Selecting a Phone Number
When Placing a Call
When the Dual mode is set, you can select a
phone number to place a call.
1
Enter a phone number in the stand-by
display and press
an To place a videophone call
Press
2
Select [Number A]/[Number B] and
Place a call from the selected phone number.
When you place a call using the Redial/Received
record, the phone number which was used to
[Change
receive/place a call previously is displayed and
the call is placed using this phone number.
Operation
[Yes].
[Yes].
you cannot change the mode while the
FOMA is outside of the service area.
Operate as instructed by
.
(V.phone).
[Check
[Mode link
[Rcv.