Table of Contents
Advertisement
When you replace the UIM (From 2in1 subscriber
to 2in1 subscriber) while 2in1 is used, to obtain a
correct Number B, you need to perform the 2in1
function OFF (P.418) first, and then set the 2in1 to
ON again.
When you replace the UIM (From 2in1 subscriber to
2in1 non-subscriber), perform the 2in1 function OFF.
When placing a voice/videophone call or originating
64K data communication from an external device,
if 2in1 is set to either the A mode or Dual mode, it
is done by Number A. When the B mode is set, it is
done by Number B.
Setting 2in1
You can set the operations such as the Stand-by
display and Receive avoid. setting by setting
the ON for 2in1.
1
From the Menu, select [Settings]
[Management]
setting] and press
The Security code screen appears.
The 2in1 setting display also appears by
pressing
for over a second in the stand-by
display when 2in1 is set to OFF.
2
Enter the Security code and press
(OK).
When 2in1 is already set to ON
The 2in1 setting display appears.
3
Select [Yes] and press
2in1 is set to ON and the 2in1 setting display
appears.
[NW Services]
[2in1
.
.
4
Set each item.
Menu
item
Mode
Switch the 2in1 modes.
switching
Select [Mode switching]
[Dual mode].
When 2in1 is set to ON, the Mode switching
display can be displayed by pressing
for over a second in the stand-by display.
Phonebook
Change the 2in1 settings saved for the Phonebook.
When an entry is saved in the Phonebook
2in1
setting
while 2in1 is set to either the A mode
or B mode, the Phonebook 2in1 setting
c o m p a t i b l e w i t h t h e 2 i n 1 m o d e i s
automatically saved.
Set each entry
S e l e c t [ P h o n e b o o k 2 i n 1 s e t t i n g ]
phonebook data
[A]/[B]/[Common].
Set for a group
Select [Phonebook 2in1 setting]
(Func)
Select [Set all groups]
(Set)
Select [A]/[B]/[Common].
Stand-by
Set the stand-by display for the B and Dual modes.
display
Select [Stand-by display]
an image from My picture of the Data Box.
You can set the following files.
Category File format File size Image size
My picture GIF/
JPEG
SWF
To specify no image, select [None].
Operation
[A mode]/[B mode]/
(Set)
Select
a group
[B mode]/[Dual mode]
Max. 250K
Max. [Stby
bytes
(480 864)],
Max. W480
H288 for GIF
animation
Max. 100K
bytes
Continued
417
Advertisement
Chapters
Table of Contents
