NTT docomo FOMA SO906i User Manual page 482

Updating the Pattern Definitions
1
From the Menu, select [Settings]
[Update] and press
2
Select [Yes]
When the pattern definitions are the latest available
There is no need to update the pattern definitions. Use them as is.
When you update the pattern definitions, your FOMA terminal-specific information (such as
model and manufacturer's serial number) is automatically sent to the server (server for the
scanning function under DoCoMo's supervision). DoCoMo will not use the information sent
from your mobile phone for any purposes other than the scanning function.
You cannot update the pattern definitions in the following cases:
- When the date/time is not set
- During a call
- While the Lock all is set
- When the UIM is not inserted
- When the FOMA terminal is connected to an external device such as a PC
- When the international roaming service is used
If you cancel the downloading operation before it is completed, the data downloaded until
this point is deleted.
Setting Whether Pattern Definitions Are Automatically Updated
You can set whether to update the pattern definitions automatically.
1
From the Menu, select [Settings]
auto-update] and press
2
Select [Valid]
The Set auto-update is set.
480
.
[Yes] and press
.
[Valid] : Update the pattern definitions automatically.
[Invalid] : Do not update the pattern definitions automatically.
[Yes] [Yes] and press
[Management]
.
- When " " is displayed
- While the Self mode is set
- While the Omakase Lock is set
- When another function is being used
[Management]
.
[Scan function]
[Scan function] [Set